{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLE2061MD","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLE2061MD","canonicalUrl":"https://icboms.com/texas-instruments/TLE2061MD","factsUrl":"https://icboms.com/api/mcp/products/TLE2061MD","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments Excalibur™ series TLE2061MD, JFET-input operational amplifier, single circuit, 2 MHz gain-bandwidth, 3.4 V/µs slew rate, 8-SOIC surface-mount package, -55 to 125°C temperature range.","salesMarkdown":"## JFET input, military temperature range — what this op-amp brings to the bench Its 4 pA input bias current and 600 µV input offset voltage suit precision analog front-ends where FET-input isolation matters — photodiode transimpedance amplifiers, high-impedance sensor buffers, and sample-and-hold stages. The 2 MHz gain-bandwidth product and 3.4 V/µs slew rate cover audio-band filtering, control-loop compensation, and low-speed data acquisition without excess phase lag. Supply range spans 7 V to 36 V, so a single 12 V or 24 V industrial rail works, as do split ±15 V supplies. The military temperature range (-55°C to 125°C) is the main differentiator from commercial-grade JFET op-amps — it qualifies the part for avionics, satellite, missile guidance, and downhole instrumentation where the ambient exceeds standard industrial limits. ## Slew rate and GBW — what they mean for signal fidelity The 3.4 V/µs slew rate means the output can swing 3.4 V in one microsecond. For a 2 V peak-to-peak sine wave, that supports frequencies up to roughly 270 kHz before slew-rate limiting distorts the waveform — adequate for audio, ultrasonic drivers, and many control loops. The 2 MHz gain-bandwidth product sets the closed-loop bandwidth: at a gain of 10, the -3 dB point lands near 200 kHz. Together these ratings tell the designer that this op-amp is not a high-speed video or RF part; it is sized for precision analog signal conditioning where bandwidth is modest but input bias current and temperature range are the critical specs. ## Supply voltage flexibility and output drive The 7 V to 36 V supply span covers most industrial and military rail voltages without an extra regulator. Running from ±15 V gives the full output swing headroom; running from a single 12 V rail still leaves margin above the 7 V minimum. The 80 mA output current per channel is high for a JFET op-amp — it can drive a 32 Ω headphone, a small solenoid, or the analog input of a successive-approximation ADC without an external buffer. Quiescent supply current is 290 µA, so the part does not waste power when the output is idle.","metaTitle":"TLE2061MD JFET Op-Amp, 2 MHz GBW, 3.4 V/µs Slew Rate, 8-SOIC","metaDescription":"Texas Instruments TLE2061MD JFET op-amp: 2 MHz GBW, 3.4 V/µs slew rate, 290 µA supply, 80 mA output, 7-36 V supply, -55 to 125°C. Active, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":"Excalibur™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"Excalibur™","Package":"Tube","Slew Rate":"3.4V/µs","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"290µA","Number of Circuits":"1","Current - Input Bias":"4 pA","Operating Temperature":"-55°C ~ 125°C","Gain Bandwidth Product":"2 MHz","Voltage - Input Offset":"600 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"80 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.54","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$3.54000","currency":"USD"},{"qty":10,"price":"$3.17900","currency":"USD"},{"qty":25,"price":"$3.00520","currency":"USD"},{"qty":100,"price":"$2.60440","currency":"USD"},{"qty":250,"price":"$2.47088","currency":"USD"},{"qty":500,"price":"$2.21710","currency":"USD"},{"qty":1000,"price":"$1.89000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/e00d6247fb3ec693a5a3191b64ab0607.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is TLE2061MD RoHS compliant?","answer":"Yes, the TLE2061MD is ROHS3 compliant, meaning it meets the latest EU RoHS directive with no exemptions for lead, mercury, cadmium, or other restricted substances."},{"question":"What is the closest functional equivalent to TLE2061MD?","answer":"The OPA859QDSGRQ1 is a JFET-input op-amp with 900 MHz GBW and AEC-Q100 qualification, but it runs from 3.3 V only. Neither is a direct pin-compatible replacement; the TLE2061MD remains the part for designs requiring the full military temperature range and wide supply span."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLE2061MD","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLE2061MD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}