{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLE2061BMJGB","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLE2061BMJGB","canonicalUrl":"https://icboms.com/texas-instruments/TLE2061BMJGB","factsUrl":"https://icboms.com/api/mcp/products/TLE2061BMJGB","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments Excalibur JFET, TLE2061BMJGB, single JFET-input op-amp, 2 MHz gain bandwidth, 3.4 V/µs slew rate, 4 pA input bias, 290 µA supply current, 80 mA output, 7 V to 36 V supply, -55°C to 125°C, 8-CDIP through-hole package.","salesMarkdown":"## Hermetic JFET op-amp for harsh environments Typical uses include precision analog signal conditioning in avionics, missile guidance, satellite telemetry, and downhole instrumentation where the hermetic ceramic package and wide temperature rating are essential. The JFET input stage delivers an input bias current of just 4 pA, making it suitable for high-impedance sensor interfaces such as photodiode amplifiers and charge integrators. It is best suited for signals below roughly 100 kHz where the full output swing is required. The 3.4 V/µs slew rate limits large-signal bandwidth; a 10 V peak-to-peak output step will be slew-rate limited to about 54 kHz. For lower amplitude signals, the 2 MHz GBW supports gains up to 20 at 100 kHz before the open-loop gain rolls off. The 300 µV typical input offset voltage is moderate for a JFET design but adequate for many precision control loops and transducer amplifiers. This wide compliance voltage makes it straightforward to interface with common industrial and military power rails: 12 V, 15 V, 24 V, or ±15 V. Despite drawing only 290 µA of quiescent supply current, the output stage can source or sink 80 mA, which is useful for driving heavy loads such as solenoids, relays, or long cable runs in a current-loop configuration. The low supply current is a key advantage in battery-powered or thermally constrained systems where every milliamp counts. ## Package and mounting — through-hole ceramic DIP The part is supplied in an 8-lead ceramic dual-in-line package (8-CDIP) with 0.300-inch (7.62 mm) row spacing. This is a through-hole package, not surface-mount, so board assembly requires plated through-holes and wave soldering or hand soldering. The ceramic body is hermetic, providing superior moisture resistance compared to plastic DIPs, which is why this package is preferred for military, aerospace, and high-reliability programs. The shipping form is Bulk, meaning the parts are not taped and reeled; they are typically shipped in tubes or trays. Verify tube quantity with your distributor when ordering production quantities. ## Lifecycle and sourcing reality For long-life programs such as defense or avionics, this Active status means there is no immediate LTB (Last Time Buy) risk, but given the niche hermetic DIP package, it is worth monitoring TI's PCN (Product Change Notification) feed for any future package or wafer-fab changes.","metaTitle":"TLE2061BMJGB JFET Op-Amp, 2 MHz GBW, 3.4 V/µs","metaDescription":"Texas Instruments TLE2061BMJGB single JFET op-amp in hermetic 8-CDIP. 2 MHz GBW, 3.4 V/µs slew rate, 4 pA bias, 290 µA supply. -55°C to 125°C. Active.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Bulk","Slew Rate":"3.4V/µs","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-CDIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"290µA","Number of Circuits":"1","Current - Input Bias":"4 pA","Operating Temperature":"-55°C ~ 125°C (TA)","Gain Bandwidth Product":"2 MHz","Voltage - Input Offset":"300 µV","Supplier Device Package":"8-CDIP","Current - Output / Channel":"80 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$24.66","stockQuantity":0,"priceTiers":[{"qty":13,"price":"$24.66000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/fccd3fef7aec73c5e969b1a4e40e422b.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the TLE2061BMJGB slew rate and gain bandwidth product?","answer":"These ratings place it in the low-to-moderate speed category, suitable for precision analog signals below 100 kHz."},{"question":"Does the TLE2061BMJGB work with a single supply voltage?","answer":"It is fully specified for single-supply operation within that range."},{"question":"What is the difference between TLE2061 and TLE2061A?","answer":"The TLE2061A is the precision-grade version of the TLE2061, offering tighter input offset voltage specifications. The TLE2061BMJGB is the standard-grade variant in the hermetic CDIP package. For the exact offset voltage limits, refer to the respective datasheet tables."},{"question":"Where can I buy TLE2061BMJGB and what is the current stock?","answer":"The TLE2061BMJGB is available to order through independent distribution. Submit an RFQ to receive a firm price and lead time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLE2061BMJGB","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLE2061BMJGB when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}