{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLC25L4CDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLC25L4CDR","canonicalUrl":"https://icboms.com/texas-instruments/TLC25L4CDR","factsUrl":"https://icboms.com/api/mcp/products/TLC25L4CDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LinCMOS™ TLC25L4CDR, CMOS quad operational amplifier, 110 kHz gain bandwidth, 0.04 V/µs slew rate, 1.4 V to 16 V supply, open-drain output, 14-SOIC surface mount, 0°C to 70°C.","salesMarkdown":"## Active production, low-power quad op-amp The Texas Instruments TLC25L4CDR is a CMOS quad operational amplifier from the LinCMOS™ series, packaged in a 14-SOIC. It draws 2.7 mA total supply current across all four channels, making it a fit for multi-channel battery-powered or thermally constrained analog front-ends. The open-drain output stage means it is not rail-to-rail — plan for external pull-up resistors if you need a logic-level output swing. ## Package and mounting It is designed for DC-precise or low-frequency signal conditioning — thermocouple amplifiers, strain-gauge bridges, or battery-voltage monitoring — where speed would trade off against noise or power. The 0.6 pA input bias current preserves accuracy when the source impedance is high, like a photodiode or pH probe. ## Supply range from 1.4 V to 16 V The supply span covers 1.4 V minimum to 16 V maximum, so a single Li-ion cell (down to its end-of-discharge voltage) or a standard 12 V industrial rail both work without a secondary regulator.","metaTitle":"Texas Instruments TLC25L4CDR LinCMOS Quad Op-Amp, 110 kHz","metaDescription":"Texas Instruments TLC25L4CDR CMOS quad op-amp, 110 kHz GBW, 0.04 V/µs slew rate, 1.4 V to 16 V supply, open-drain output, 14-SOIC.","metaKeywords":null},"attributes":{"series":"LinCMOS™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"LinCMOS™","Package":"Bulk","Slew Rate":"0.04V/µs","Output Type":"Open Drain","Mounting Type":"Surface Mount","Amplifier Type":"CMOS","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"2.7mA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"0.6 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"110 kHz","Voltage - Input Offset":"1.1 mV","Supplier Device Package":"14-SOIC","Voltage - Supply Span (Max)":"16 V","Voltage - Supply Span (Min)":"1.4 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.11","stockQuantity":0,"priceTiers":[{"qty":270,"price":"$1.11000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/a38db356b0cebb840487cd8b5085f5a2.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Does TLC25L4CDR have rail-to-rail output?","answer":"No, the output type is open drain, so it cannot swing rail-to-rail. An external pull-up resistor is needed for logic-level output."},{"question":"What is the replacement for TLC25L4CDR if it is not available?","answer":"The TLC25L4CDR is active and available; no official replacement has been issued. For a faster alternative with rail-to-rail output, the OPA4374AIPWT offers 6.5 MHz GBW and 5 V/µs slew rate, but at higher supply current."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLC25L4CDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLC25L4CDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}