{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLC2272ACP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLC2272ACP","canonicalUrl":"https://icboms.com/texas-instruments/TLC2272ACP","factsUrl":"https://icboms.com/api/mcp/products/TLC2272ACP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLC2272ACP dual CMOS rail-to-rail operational amplifier, 2.25 MHz gain-bandwidth, 3.6 V/µs slew rate, 1 pA input bias, 8-DIP through-hole package, tube.","salesMarkdown":"## 2.25 MHz GBW, 3.6 V/µs — the signal-frequency ceiling The TLC2272ACP is a dual CMOS operational amplifier from Texas Instruments, delivering 2.25 MHz gain-bandwidth product and 3.6 V/µs slew rate. For a closed-loop gain of 10, the small-signal bandwidth is roughly 225 kHz — sufficient for audio-band conditioning, sensor amplification, and control-loop filtering in industrial or instrumentation circuits. ## Rail-to-rail output with 50 mA drive — no buffer needed The rail-to-rail output stage swings within millivolts of the supply rails and sources or sinks 50 mA per channel. That drive capability lets the op-amp directly feed a successive-approximation ADC input, drive a cable capacitance, or bias a downstream transistor stage without an external buffer. Supply span runs from 4.4 V to 16 V single or dual supply — the 2.4 mA total quiescent current (both channels) keeps the power budget tight for a 5 V or 12 V rail in a multi-channel board. ## 1 pA input bias — the high-impedance front-end enabler Input bias current is 1 pA typical, with a 300 µV maximum input offset voltage. For a 1 MΩ source impedance, the voltage error from bias current is 1 µV — negligible compared to the offset. This makes the TLC2272ACP a fit for photodiode preamps, pH probe buffers, or any sensor front-end where the source impedance is in the megohm range. The CMOS input stage keeps bias current low across the 0°C to 70°C commercial temperature range — no significant increase until above 85°C, which is outside this part's rated ambient. ## 8-DIP through-hole — prototype and low-volume BOM anchor Housed in an 8-pin DIP (0.300-inch body, 7.62 mm width), the TLC2272ACP is socket-friendly and hand-solderable. The through-hole package suits breadboard prototyping, rework stations, and production runs where wave-solder or manual assembly is preferred over reflow. Supplied in tube — the standard DIP shipping format for pick-and-place tube feeders or manual kitting.","metaTitle":"TLC2272ACP Texas Instruments CMOS Op-Amp, 2.25 MHz, 8-DIP","metaDescription":"TLC2272ACP dual CMOS rail-to-rail op-amp, 2.25 MHz GBW, 3.6 V/µs slew rate, 1 pA bias. Active, RoHS3, 8-DIP through-hole. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Package":"Tube","Slew Rate":"3.6V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Through Hole","Amplifier Type":"CMOS","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"2.4mA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"1 pA","Operating Temperature":"0°C ~ 70°C (TA)","Gain Bandwidth Product":"2.25 MHz","Voltage - Input Offset":"300 µV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"50 mA","Voltage - Supply Span (Max)":"16 V","Voltage - Supply Span (Min)":"4.4 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$8.88","priceTiers":[{"qty":1,"price":"$8.88000","currency":"USD"},{"qty":10,"price":"$7.97100","currency":"USD"},{"qty":25,"price":"$7.53640","currency":"USD"},{"qty":100,"price":"$6.53140","currency":"USD"},{"qty":250,"price":"$6.19652","currency":"USD"},{"qty":500,"price":"$5.56010","currency":"USD"},{"qty":1000,"price":"$4.73981","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/e8e0a719627b3cfb0752f5db88bc67b6.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLC2272ACP/alternatives.json"},"ai":{"faq":[{"question":"What is the TLC2272ACP's gain-bandwidth product and why does it matter?","answer":"The gain-bandwidth product is 2.25 MHz. At a closed-loop gain of 10, the usable small-signal bandwidth is about 225 kHz — enough for audio, sensor, and control-loop applications. The 3.6 V/µs slew rate means the output can swing 3.6 V in one microsecond, so a 2 V peak-to-peak sine wave at 200 kHz stays within the linear slew limit."},{"question":"What package does the TLC2272ACP come in and is it suitable for prototyping?","answer":"The TLC2272ACP is supplied in an 8-pin DIP package (8-DIP, 0.300-inch body width, 7.62 mm pitch). The through-hole format fits standard breadboards and IC sockets, making it well-suited for prototyping, rework, and manual assembly."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLC2272ACP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLC2272ACP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}