{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLC2262ID","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLC2262ID","canonicalUrl":"https://icboms.com/texas-instruments/TLC2262ID","factsUrl":"https://icboms.com/api/mcp/products/TLC2262ID","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LinCMOS™ TLC2262ID, dual CMOS operational amplifier, 730 kHz gain bandwidth, 0.55 V/µs slew rate, rail-to-rail output, 1 pA input bias, 425 µA supply per channel, 8-SOIC package, -40°C to 125°C.","salesMarkdown":"## Dual CMOS op-amp for precision signal conditioning The TLC2262ID: It features rail-to-rail output swing, which maximises dynamic range in single-supply designs from 4.4 V to 16 V. Input bias current is just 1 pA, making it suitable for high-impedance sensor interfaces such as photodiode amplifiers, pH probes, and piezoelectric transducers where bias current errors would otherwise dominate. Each channel draws 425 µA supply current, keeping the total dual-channel quiescent draw under 1 mA — a fit for battery-powered or thermally constrained industrial control boards. The 125°C upper limit also suits downhole instrumentation and engine-bay sensor conditioning where ambient temperatures exceed 105°C. ## Output drive and supply range Each channel can source or sink 50 mA, enough to drive moderate loads like a 100 Ω headphone or an ADC reference buffer directly. The 4.4 V minimum supply span means it works with 5 V ±10% rails and 3.3 V systems only if the rail is boosted above 4.4 V — a 5 V rail is the practical floor for this part. At 16 V maximum supply, it fits 12 V and 15 V industrial rails with headroom for transients. Input offset voltage is 300 µV typical, adequate for 12-bit signal chains where the offset error stays below 1 LSB at a 2.5 V reference. ## Lifecycle and compliance It is suitable for both new design-ins and sustaining production. The ROHS3 compliance covers all six original substances plus the four phthalates, satisfying EU and global regulatory requirements without a separate certificate hunt.","metaTitle":"TLC2262ID Texas Instruments Dual CMOS Op-Amp, 730 kHz","metaDescription":"Texas Instruments TLC2262ID dual CMOS op-amp with 730 kHz GBW, 0.55 V/µs slew rate, rail-to-rail output, 1 pA input bias, -40°C to 125°C.","metaKeywords":null},"attributes":{"series":"LinCMOS™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"LinCMOS™","Package":"Tube","Slew Rate":"0.55V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"CMOS","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"425µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 125°C","Gain Bandwidth Product":"730 kHz","Voltage - Input Offset":"300 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"50 mA","Voltage - Supply Span (Max)":"16 V","Voltage - Supply Span (Min)":"4.4 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.85","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$2.85000","currency":"USD"},{"qty":10,"price":"$2.55900","currency":"USD"},{"qty":25,"price":"$2.41400","currency":"USD"},{"qty":100,"price":"$2.05690","currency":"USD"},{"qty":250,"price":"$1.93132","currency":"USD"},{"qty":500,"price":"$1.68990","currency":"USD"},{"qty":1000,"price":"$1.40021","currency":"USD"},{"qty":2500,"price":"$1.36650","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/2f881c12c7c549561be914138a5275fd.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is TLC2262ID RoHS compliant?","answer":"Yes, the TLC2262ID is ROHS3 compliant, covering all six original restricted substances plus the four phthalates (DEHP, BBP, DBP, DIBP). No exemption paperwork is needed for EU or global markets."},{"question":"What is the closest functional second-source for TLC2262ID?","answer":"The TLV9362IDDFR is a dual general-purpose rail-to-rail op-amp with a 10.6 MHz gain bandwidth and 25 V/µs slew rate — a faster alternative in the same package footprint. For a closer parametric match, the TLV9351IDCKR is a single-channel part with 3.5 MHz GBW and 20 V/µs slew rate, but it is single-channel only. Neither is a direct pin-compatible replacement; evaluate the trade-offs in bandwidth, supply current, and channel count before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLC2262ID","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLC2262ID when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}