{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLC2262CDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLC2262CDR","canonicalUrl":"https://icboms.com/texas-instruments/TLC2262CDR","factsUrl":"https://icboms.com/api/mcp/products/TLC2262CDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LinCMOS™ series, TLC2262CDR dual CMOS operational amplifier, rail-to-rail output, 730 kHz gain bandwidth, 0.55 V/µs slew rate, 8-SOIC package, tape and reel.","salesMarkdown":"## Dual CMOS Op-Amp in 8-SOIC for Low-Power Signal Chains The TLC2262CDR is a dual CMOS operational amplifier from Texas Instruments' LinCMOS™ series, packaged in an 8-SOIC (0.154\", 3.90 mm width) surface-mount package. It is a rail-to-rail output device, meaning the output can swing to within millivolts of both supply rails — useful when driving an ADC input or a single-supply load without losing dynamic range. With a gain bandwidth product of 730 kHz and a slew rate of 0.55 V/µs, this amplifier is sized for low-frequency sensor conditioning, active filtering below 100 kHz, and general-purpose buffering where speed is not the constraint but power is. ## Parametric Fit for Battery-Powered and Precision Front-Ends The input bias current is 1 pA typical — this is the CMOS-gate leakage floor, so the amplifier does not load high-impedance sources like photodiode or pH probe outputs. The input offset voltage is 300 µV, which sets the DC accuracy ceiling for a gain-of-100 stage at 30 mV of output error before calibration. Total supply current is 425 µA per channel, typical for a dual CMOS op-amp at this bandwidth. The supply span ranges from 4.4 V minimum to 16 V maximum, covering single 5 V rails and dual ±5 V or ±8 V supplies. Each channel can source or sink 50 mA — enough to drive a headphone or a small relay coil directly. The operating temperature range is 0°C to 70°C, which is the commercial grade. This limits the part to indoor, controlled-environment boards — not automotive or industrial outdoor enclosures without thermal margin. ## Package, Supply and Compliance Baseline Available in Tape & Reel (TR) or Cut Tape (CT) for prototyping. The surface-mount package suits automated pick-and-place assembly; no special handling beyond standard MSL level is required.","metaTitle":"TLC2262CDR CMOS Op-Amp, Rail-to-Rail, 730 kHz, 8-SOIC","metaDescription":"Texas Instruments TLC2262CDR dual CMOS op-amp, 730 kHz GBW, 0.55 V/µs slew rate, rail-to-rail output, 8-SOIC. Active production, ROHS3 compliant.","metaKeywords":null},"attributes":{"series":"LinCMOS™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Series":"LinCMOS™","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"0.55V/µs","Output Type":"Rail-to-Rail","Mounting Type":"Surface Mount","Amplifier Type":"CMOS","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"425µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"1 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"730 kHz","Voltage - Input Offset":"300 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"50 mA","Voltage - Supply Span (Max)":"16 V","Voltage - Supply Span (Min)":"4.4 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.11","priceTiers":[{"qty":1,"price":"$2.11000","currency":"USD"},{"qty":10,"price":"$1.89600","currency":"USD"},{"qty":25,"price":"$1.78880","currency":"USD"},{"qty":100,"price":"$1.52400","currency":"USD"},{"qty":250,"price":"$1.43100","currency":"USD"},{"qty":500,"price":"$1.25212","currency":"USD"},{"qty":1000,"price":"$1.03748","currency":"USD"},{"qty":2500,"price":"$1.01250","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/2f881c12c7c549561be914138a5275fd.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TLC2262CDR/alternatives.json"},"ai":{"faq":[{"question":"What is the closest functional alternative to TLC2262CDR?","answer":"The TLV9351IDCKR is a single-channel general-purpose op-amp with a 3.5 MHz bandwidth and 20 V/µs slew rate — faster but single-channel, so it does not drop into a dual-channel socket without a board change. The TLV9362IDDFR is a dual-channel part with 10.6 MHz bandwidth and 25 V/µs slew rate, also wider bandwidth. Neither is a pin-compatible second-source; the TLC2262CDR's 730 kHz bandwidth and 425 µA supply per channel are specific to its low-power CMOS design."},{"question":"What compliance documentation does Texas Instruments provide for TLC2262CDR?","answer":"The part is ROHS3 compliant per Texas Instruments. Standard documentation includes the datasheet, RoHS certificate of compliance, and material declaration. No UL or IEC certification is listed for this device."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLC2262CDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLC2262CDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}