{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TLC081CD","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TLC081CD","canonicalUrl":"https://icboms.com/texas-instruments/TLC081CD","factsUrl":"https://icboms.com/api/mcp/products/TLC081CD","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TLC081CD, single general-purpose op-amp, 10 MHz GBW, 19 V/µs slew rate, 1.9 mA supply, 57 mA output, 8-SOIC package, 0°C to 70°C.","salesMarkdown":"It delivers a 10 MHz gain-bandwidth product and a 19 V/µs slew rate, drawing 1.9 mA supply current while sourcing or sinking 57 mA per channel. The 10 MHz gain-bandwidth product supports closed-loop gains up to 10 at 1 MHz with reasonable phase margin, adequate for audio-band processing, sensor amplification up to several hundred kHz, and active filter poles in the 100 kHz to 1 MHz range. The 19 V/µs slew rate keeps large-signal distortion low for output swings of several volts at frequencies above 100 kHz — a meaningful step up from slower general-purpose amps like the LM358 or TLV237x that struggle above 3 V/µs. Input bias current is 2 pA typical, so high-impedance sources (photodiode, pH probe, piezoelectric sensor) see negligible loading. Input offset voltage is 390 µV typical — acceptable for 12-bit precision at gains below 100, but a precision amp like the OPAx188 would be a better fit for microvolt-level signals. ## Temperature grade and environment It belongs in indoor benchtop gear, consumer electronics, and office equipment — not in automotive engine bays, outdoor telecom cabinets, or factory-floor enclosures where ambient can hit 85°C or higher. For extended-temperature designs, TI offers the TLC081AID (industrial -40°C to 125°C) in the same 8-SOIC footprint. ## Lifecycle and compliance Active product status per TI's current lifecycle record. ROHS3 compliant. The 8-SOIC package ships in Tube form (standard for this order code).","metaTitle":"TLC081CD general-purpose op-amp, 10 MHz GBW","metaDescription":"TI TLC081CD single general-purpose op-amp in 8-SOIC. 10 MHz GBW, 19 V/µs slew rate, 1.9 mA supply, 57 mA output. 0°C to 70°C. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Tube","Slew Rate":"19V/µs","Mounting Type":"Surface Mount","Amplifier Type":"General Purpose","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.9mA","Number of Circuits":"1","Current - Input Bias":"2 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"10 MHz","Voltage - Input Offset":"390 µV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"57 mA","Voltage - Supply Span (Max)":"16 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.95","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$1.95000","currency":"USD"},{"qty":10,"price":"$1.75600","currency":"USD"},{"qty":25,"price":"$1.65640","currency":"USD"},{"qty":100,"price":"$1.41110","currency":"USD"},{"qty":250,"price":"$1.32500","currency":"USD"},{"qty":500,"price":"$1.15938","currency":"USD"},{"qty":1000,"price":"$0.96062","currency":"USD"},{"qty":2500,"price":"$0.93750","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/a7122ed2ba2b34ba90cd32d198ca404d.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the replacement or equivalent for TLC081CD?","answer":"TI lists no direct replacement for the TLC081CD because it remains active. For a functionally similar part with wider temperature range, consider the TLC081AID (industrial -40°C to 125°C) in the same 8-SOIC package. The TLV9351IDCKR is a newer-generation single op-amp with 3.5 MHz GBW and rail-to-rail output, but it is not a pin-for-pin drop-in — verify the supply range and output swing against your design."},{"question":"Can TLC081CD be used as a comparator?","answer":"It is a general-purpose op-amp, not designed for comparator duty. Operating it open-loop with differential inputs can cause phase inversion and prolonged saturation recovery. Use a dedicated comparator like the TLV3501 for high-speed threshold detection."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TLC081CD","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TLC081CD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}