{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL431BCDBVRE4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL431BCDBVRE4","canonicalUrl":"https://icboms.com/texas-instruments/TL431BCDBVRE4","factsUrl":"https://icboms.com/api/mcp/products/TL431BCDBVRE4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL431BCDBVRE4, adjustable shunt voltage reference, ±0.5% tolerance, 100 mA output, 2.495 V to 36 V, SOT-23-5, 0°C to 70°C.","salesMarkdown":"## Adjustable shunt reference, ±0.5% — the B-grade precision tier The ±0.5% tolerance places it in the B-grade precision tier — tighter than the standard ±1% or ±2% grades, making it the choice for designs that need better than 1% initial accuracy without moving to an expensive bandgap reference. ## 100 mA cathode current — the drive budget for the shunt The TL431BCDBVRE4 can sink up to 100 mA continuous through the cathode. That 100 mA is the total current budget: the sum of the bias current through the resistor divider and the load current the shunt pulls to ground. A typical 10 kΩ divider from a 5 V rail draws about 0.5 mA, leaving 99.5 mA for the load — enough for most low-power regulation and monitoring circuits. The minimum cathode current to maintain regulation is 600 µA; designs must ensure the operating point never drops below that or the output drifts out of spec. That is the commercial-grade window — fine for benchtop instruments, office power supplies, and consumer electronics. Not rated for motor drives, outdoor telecom cabinets, or any environment that sees freezing or sustained heat. If the BOM calls for industrial or automotive temperature range, this variant will not hold the ±0.5% tolerance at the extremes.","metaTitle":"TL431BCDBVRE4 Shunt Reference, ±0.5%, Obsolete","metaDescription":"Texas Instruments TL431BCDBVRE4 adjustable shunt voltage reference, ±0.5% tolerance, 100 mA output, SOT-23-5.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR)","Tolerance":"±0.5%","Output Type":"Adjustable","Mounting Type":"Surface Mount","Package / Case":"SC-74A, SOT-753","Product Status":"Obsolete","Reference Type":"Shunt","Voltage - Input":"-","lifecycle_stage":"eol_hot","Current - Output":"100 mA","Current - Supply":"-","Current - Cathode":"600 µA","Base Product Number":"TL431","Noise - 0.1Hz to 10Hz":"-","Noise - 10Hz to 10kHz":"-","Operating Temperature":"0°C~70°C(TA)","Voltage - Output (Max)":"36 V","Supplier Device Package":"SOT-23-5","Temperature Coefficient":"-","Voltage - Output (Min/Fixed)":"2.495V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/99b53f28cf28b982a16c2a9ac87cd6e9.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL431BCDBVRE4/alternatives.json"},"ai":{"faq":[{"question":"What is the replacement for TL431BCDBVRE4?","answer":"For a drop-in replacement, look at the TL431BIDBVR (industrial temperature, -40°C to 85°C) if the temperature range is acceptable, or the TL431AIDBVR (1% tolerance) if the precision requirement can relax. Both are active and pin-compatible in the same SOT-23-5 footprint."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL431BCDBVRE4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL431BCDBVRE4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}