{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL322IP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL322IP","canonicalUrl":"https://icboms.com/texas-instruments/TL322IP","factsUrl":"https://icboms.com/api/mcp/products/TL322IP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL322IP, General Purpose Amplifier, 2 Circuit, 8-PDIP, Through Hole, 1 MHz Gain Bandwidth, 0.6 V/µs Slew Rate, 5 V to 30 V Supply.","salesMarkdown":"## Dual general-purpose op-amp in a through-hole DIP-8 It delivers a 1 MHz gain-bandwidth product and a 0.6 V/µs slew rate — adequate for audio processing, sensor signal conditioning, and control-loop amplification where speed is not the primary constraint. Each of the two amplifiers can swing 10 mA output current, and the input bias current is 200 nA, typical for a bipolar-input stage. The supply span ranges from 5 V to 30 V, allowing operation from a single 5 V logic rail up to a ±15 V split supply. With a 1 MHz gain-bandwidth product, the TL322IP can provide a closed-loop gain of 10 up to about 100 kHz before the open-loop gain rolls off. The 0.6 V/µs slew rate limits the large-signal bandwidth: at a 10 V peak-to-peak output, the full-power bandwidth is roughly 9.5 kHz. For applications like 20 kHz audio or fast comparator outputs, a faster op-amp (e.g., 3 MHz GBW or higher) would be a better fit. ## Supply voltage flexibility: 5 V to 30 V The 5 V minimum supply means the TL322IP can run directly from a 5 V logic rail without a boost converter. The 30 V maximum covers 24 V industrial buses and ±15 V analog supplies. Input offset voltage is specified at 2 mV typical, which is acceptable for many general-purpose signal chains but may require trimming for precision DC applications.","metaTitle":"TL322IP General Purpose Op-Amp, 1 MHz, 0.6 V/µs, DIP-8","metaDescription":"Texas Instruments TL322IP dual general-purpose op-amp: 1 MHz GBW, 0.6 V/µs slew rate, 5–30 V supply, -40 to 85°C, DIP-8.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Bulk","Slew Rate":"0.6V/µs","Mounting Type":"Through Hole","Amplifier Type":"General Purpose","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"200 nA","Operating Temperature":"-40°C ~ 85°C","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"2 mV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"10 mA","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.33","stockQuantity":0,"priceTiers":[{"qty":902,"price":"$0.33000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/a6d26aa4c8fdb41f3744efe4e09d7d7c.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Can TL322IP be used as a replacement for LM358?","answer":"The TL322IP is a dual general-purpose op-amp in the same DIP-8 footprint as the LM358, with similar supply range and bandwidth. The LM358 typically has a 1 MHz GBW and 0.6 V/µs slew rate, so the TL322IP is a functional equivalent in many circuits. Verify pin compatibility and input offset voltage (2 mV for TL322IP) against your application requirements."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL322IP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL322IP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}