{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL084CPWR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL084CPWR","canonicalUrl":"https://icboms.com/texas-instruments/TL084CPWR","factsUrl":"https://icboms.com/api/mcp/products/TL084CPWR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL084CPWR, JFET-input quad operational amplifier, 3 MHz gain bandwidth product, 13V/µs slew rate, 30 pA input bias current, 1.4 mA supply current, 14-TSSOP package, 0°C to 70°C operating temperature.","salesMarkdown":"## JFET quad op-amp for multi-channel signal conditioning The Texas Instruments TL084CPWR is a JFET-input quad operational amplifier in a 14-TSSOP package, designed for multi-channel signal conditioning where high input impedance and low bias current are required. ## Slew rate and bandwidth — what drives the filter design The 13V/µs slew rate sets the large-signal bandwidth ceiling: for a 10 V peak-to-peak output swing, the full-power bandwidth is roughly 200 kHz — above that the output waveform distorts into a triangle. A designer sizing a 100 kHz active low-pass filter should verify the slew rate does not limit the signal amplitude at the target frequency. The 3 MHz gain bandwidth product means a non-inverting stage with a closed-loop gain of 10 has a -3 dB bandwidth of about 300 kHz. For precision DC-coupled stages, the 3 mV input offset voltage (typical) and 30 pA input bias current define the DC error budget at the output. ## Supply current and rail range — power budget fit Total supply current is 1.4 mA for all four amplifiers, making this a reasonable choice for battery-powered or multi-channel systems where per-channel power is budgeted at 350 µA. The supply span from 10 V to 30 V accommodates single-rail designs at 12 V or 15 V, and split-rail designs at ±5 V to ±15 V. The same die is available in other package options (DIP, SOIC) under different order codes if the footprint needs to change.","metaTitle":"TL084CPWR JFET Quad Op-Amp, 13V/µs Slew Rate, 3 MHz GBW","metaDescription":"Texas Instruments TL084CPWR JFET-input quad op-amp: 13V/µs slew rate, 3 MHz gain bandwidth, 1.4 mA supply current.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"14-TSSOP (0.173\\\", 4.40mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x4 Channels)","Number of Circuits":"4","Base Product Number":"TL084","Current - Input Bias":"30 pA","Operating Temperature":"0°C~70°C","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"14-TSSOP","Current - Output / Channel":"10 mA","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.5600","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/bd0d2120e3c12ca626ffeb622ac6a207.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL084CPWR/alternatives.json"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to TL084CPWR in the same family?","answer":"Within the TL084 family, the TL084CDR (SOIC-14) and TL084CN (PDIP-14) use the same JFET-input quad amplifier die but in different packages. The TL084CPWR is the 14-TSSOP surface-mount variant. For a drop-in replacement in the same 14-TSSOP footprint, the TL084CPW (tube) shares the same package and pinout; only the reel quantity differs."},{"question":"What is the slew rate of TL084CPWR?","answer":"The TL084CPWR has a slew rate of 13V/µs, typical. This is the large-signal response rate from the JFET input stage; it supports audio-frequency active filters and general-purpose signal conditioning up to roughly 200 kHz full-power bandwidth at 10 V peak-to-peak output."},{"question":"What package does TL084CPWR come in?","answer":"The TL084CPWR is supplied in a 14-TSSOP package (0.173-inch body width, 4.40 mm). The 'R' suffix indicates tape-and-reel packaging; cut-tape quantities are also available through distribution."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL084CPWR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL084CPWR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}