{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL084ACDRG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL084ACDRG4","canonicalUrl":"https://icboms.com/texas-instruments/TL084ACDRG4","factsUrl":"https://icboms.com/api/mcp/products/TL084ACDRG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL084ACDRG4, J-FET quad operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 30 pA input bias, 1.4mA supply per channel, 14-SOIC surface mount, 0°C~70°C.","salesMarkdown":"## J-FET input quad op-amp with 13V/µs slew rate The Texas Instruments TL084ACDRG4 is a J-FET input quad operational amplifier in a 14-SOIC surface-mount package. It delivers a 3 MHz gain bandwidth product and a 13V/µs slew rate, with a typical input bias current of just 30 pA — suited for high-impedance sensor conditioning and audio pre-amplifier stages where low noise and fast settling matter. ## Supply range and quiescent current Operating from a single or split supply spanning 10 V to 30 V total, the TL084ACDRG4 draws only 1.4 mA per channel (5.6 mA total for the quad). If your BOM needs a wider range, look at the TL084AI or TL084ACN variants.","metaTitle":"TL084ACDRG4 J-FET Quad Op-Amp, 13V/µs Slew Rate, 14-SOIC","metaDescription":"Texas Instruments TL084ACDRG4 J-FET quad op-amp, 3 MHz GBW, 13V/µs slew rate, 30 pA input bias. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR)","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x4 Channels)","Number of Circuits":"4","Base Product Number":"TL084","Current - Input Bias":"30 pA","Operating Temperature":"0°C~70°C","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"14-SOIC","Current - Output / Channel":"10 mA","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/bd0d2120e3c12ca626ffeb622ac6a207.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL084ACDRG4/alternatives.json"},"ai":{"faq":[{"question":"What is the difference between TL084A and TL084?","answer":"The TL084A is a tighter-offset-voltage selection of the standard TL084. The TL084ACDRG4 specifies a typical input offset voltage of 3 mV, compared to the standard TL084's 5 mV typical. For precision DC-coupled stages, the 'A' grade reduces the need for external nulling."},{"question":"Can TL084ACDRG4 replace TL084CN?","answer":"Functionally yes — both are quad J-FET op-amps with the same pinout and similar AC performance. The TL084ACDRG4 is a surface-mount 14-SOIC package (TL084CN is a DIP-14). On a through-hole board you would need an adapter; on a new SMD layout the SOIC footprint is a drop-in."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL084ACDRG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL084ACDRG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}