{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL082CN","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"TL082CN","canonicalUrl":"https://icboms.com/stmicroelectronics/TL082CN","factsUrl":"https://icboms.com/api/mcp/products/TL082CN","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL082CN, dual JFET-input operational amplifier, 4 MHz gain bandwidth, 16 V/µs slew rate, 1.4 mA supply, 8-DIP through-hole package, automotive grade AEC-Q100 qualified.","salesMarkdown":"## JFET op-amp for signal conditioning and audio paths It operates from a split supply spanning 6 V to 36 V, drawing just 1.4 mA per amplifier. The JFET input stage delivers a typical input bias current of 20 pA, making it suitable for high-impedance sensor interfaces, audio preamplifiers, and active filter stages where low input current drift matters. ## Automotive grade in a commercial temperature envelope That qualification signals it was manufactured on a line and with process controls aligned to automotive reliability standards — useful for designs that need the AEC-Q100 certificate for a bill of materials even if the ambient temperature stays within commercial limits. ## Through-hole DIP-8 — legacy footprint for repair and prototyping Housed in an 8-DIP (0.300-inch, 7.62 mm pitch) package with through-hole mounting, the TL082CN is a direct fit for existing PCB layouts that use the standard DIP-8 footprint. This form factor is common in bench prototypes, rework of older audio equipment, and low-volume builds where hand-soldering is preferred over SMD reflow.","metaTitle":"TL082CN JFET Op-Amp, 4 MHz, 16 V/µs, DIP-8, Obsolete","metaDescription":"TL082CN dual JFET op-amp: 4 MHz GBW, 16 V/µs slew rate, 1.4 mA supply, AEC-Q100 automotive grade. Through-hole DIP-8.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"STMicroelectronics","Grade":"Automotive","Series":"-","Package":"Tube","Slew Rate":"16V/µs","Output Type":"-","Mounting Type":"Through Hole","Qualification":"AEC-Q100","Amplifier Type":"J-FET","Package / Case":"8-DIP (0.300\\\", 7.62mm)","Product Status":"Obsolete","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA","Number of Circuits":"2","Base Product Number":"TL082","Current - Input Bias":"20 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"4 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"8-Mini DIP","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"6 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$8.9400","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/bad7fea99510bfd2cb472c30e72879d3.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL082CN/alternatives.json"},"ai":{"faq":[{"question":"What is the replacement for TL082CN?","answer":"Texas Instruments has not published an official successor order code for the TL082CN in the DIP-8 package. For a pin-compatible functional replacement within the same family, the TL082CP (commercial grade, DIP-8) is a common cross-shop candidate — confirm the temperature grade and qualification requirements for your BOM before substituting."},{"question":"What is the difference between TL082CN and TL082CP?","answer":"The TL082CN carries an Automotive grade designation and AEC-Q100 qualification, while the TL082CP is typically a commercial-grade variant. Both share the same JFET op-amp core (4 MHz GBW, 16 V/µs slew rate) and DIP-8 package. If your design does not require AEC-Q100, the TL082CP may be a cost-effective alternative — verify the operating temperature range matches your environment."},{"question":"Is TL082CN RoHS compliant?","answer":"The evidence does not specify RoHS compliance status for this order code. Confirm with the supplier at quote time, as RoHS status can vary by date code and manufacturing lot for obsolete parts sourced through independent channels."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/TL082CN","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/TL082CN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}