{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL082BCDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL082BCDR","canonicalUrl":"https://icboms.com/texas-instruments/TL082BCDR","factsUrl":"https://icboms.com/api/mcp/products/TL082BCDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL082BCDR, dual JFET-input operational amplifier, 3 MHz gain bandwidth product, 13 V/µs slew rate, 30 pA input bias current, 1.4 mA per channel supply current, 0°C to 70°C, 8-SOIC package, Tape & Reel.","salesMarkdown":"## 3 MHz GBW with 13 V/µs slew — the signal bandwidth ceiling The 30 pA input bias current, typical of JFET stages, lets it interface directly with high-impedance sources like photodiodes or piezo sensors without an external buffer. ## Supply range and current — what the rails need The part runs on a supply span from 10 V to 30 V, which covers both single-supply (10 V to 30 V) and split-supply (±5 V to ±15 V) configurations. Each of the two channels draws 1.4 mA quiescent current, so the total supply budget is 2.8 mA plus the output load. The 10 mA per-channel output current rating is enough to drive a typical ADC input or a 2 kΩ load to near-rail swing, but not a 50 Ω transmission line. For industrial or automotive applications that see -40°C or +85°C, look at the TL082I or TL082Q industrial-grade siblings in the same family. ## SOIC-8 package — rework and footprint The SOIC-8 is a rework-friendly package — a hot-air station set to 300°C with a fine nozzle lifts the part cleanly without lifting pads, provided the board is dry (MSL-1 typical for this package family).","metaTitle":"TL082BCDR JFET Op-Amp, 3 MHz GBW, 13 V/µs Slew Rate","metaDescription":"Texas Instruments TL082BCDR dual JFET op-amp in SOIC-8. 3 MHz gain bandwidth, 13 V/µs slew rate, 30 pA input bias. Active lifecycle, commercial temp range.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x2 Channels)","Number of Circuits":"2","Base Product Number":"TL082","Current - Input Bias":"30 pA","Operating Temperature":"0°C~70°C","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"2 mV","Supplier Device Package":"8-SOIC","Current - Output / Channel":"10 mA","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.2900","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/bd0d2120e3c12ca626ffeb622ac6a207.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL082BCDR/alternatives.json"},"ai":{"faq":[{"question":"Does TL082BCDR require a bipolar supply?","answer":"No. The supply span is 10 V to 30 V, so it works on a single supply (e.g., 12 V or 24 V) or a split supply (e.g., ±5 V to ±15 V). The input and output are not rail-to-rail — expect about 1.5 V headroom from each rail with a 10 kΩ load."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL082BCDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL082BCDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}