{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL082ACDT","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"TL082ACDT","canonicalUrl":"https://icboms.com/stmicroelectronics/TL082ACDT","factsUrl":"https://icboms.com/api/mcp/products/TL082ACDT","rawCanonicalId":null},"summary":{"shortDescription":"STMicroelectronics TL082ACDT, dual JFET-input operational amplifier, 4 MHz gain bandwidth, 16 V/µs slew rate, 6 V to 36 V supply, AEC-Q100 qualified, 8-SOIC surface-mount package, 0°C to 70°C operating temperature.","salesMarkdown":"## Dual JFET op-amp with AEC-Q100 screening It operates from a single or split supply spanning 6 V to 36 V and draws 1.4 mA per amplifier quiescent current. The JFET input stage delivers 20 pA typical input bias current and 3 mV maximum input offset voltage, making it suited for high-impedance signal conditioning, active filters, and ADC driver stages where input leakage must be minimized. ## Automotive-grade screening, commercial temperature range The AEC-Q100 stamp here reflects the screening and quality flow rather than a wide temperature rating, so it fits applications where the assembly environment is controlled (cabin electronics, infotainment, test equipment) but not under-hood or engine-bay exposure where -40°C to 125°C would be needed. ## Slew rate and bandwidth: what they mean for signal fidelity The 16 V/µs slew rate supports large-signal swings up to roughly 250 kHz at full output before slew-induced distortion sets in. For small-signal applications, the 4 MHz gain-bandwidth product defines the closed-loop bandwidth at a given gain—unity-gain bandwidth is 4 MHz, dropping to 400 kHz at a gain of 10. These numbers are typical for a general-purpose JFET op-amp and are adequate for audio processing, motor-current sensing at moderate bandwidths, and low-frequency ADC front-ends. The supplier device package is designated 8-SO.","metaTitle":"STMicro TL082ACDT JFET Op-Amp, Dual, 4 MHz, AEC-Q100","metaDescription":"TL082ACDT dual JFET op-amp from STMicro, 4 MHz GBW, 16 V/µs slew rate, AEC-Q100 qualified, 8-SOIC.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"STMicroelectronics","Grade":"Automotive","Series":"-","Package":"Tape & Reel (TR) Cut Tape (CT)","Slew Rate":"16V/µs","Output Type":"-","Mounting Type":"Surface Mount","Qualification":"AEC-Q100","Amplifier Type":"J-FET","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA","Number of Circuits":"2","Base Product Number":"TL082","Current - Input Bias":"20 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"4 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"8-SO","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"6 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.8600","priceTiers":[{"qty":1,"price":"$0.86000","currency":"USD"},{"qty":10,"price":"$0.75900","currency":"USD"},{"qty":25,"price":"$0.71280","currency":"USD"},{"qty":100,"price":"$0.58180","currency":"USD"},{"qty":250,"price":"$0.54044","currency":"USD"},{"qty":500,"price":"$0.45996","currency":"USD"},{"qty":1000,"price":"$0.36796","currency":"USD"},{"qty":2500,"price":"$0.33347","currency":"USD"},{"qty":5000,"price":"$0.31047","currency":"USD"},{"qty":12500,"price":"$0.29897","currency":"USD"},{"qty":25000,"price":"$0.28747","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/cd5f353e3dd7b26a19f772c8f31c7078.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL082ACDT/alternatives.json"},"ai":{"faq":[{"question":"Is TL082ACDT AEC-Q100 qualified?","answer":"Yes, the TL082ACDT is AEC-Q100 qualified, which means it has passed automotive-grade stress tests. Note that its operating temperature range is 0°C to 70°C (commercial grade), so the qualification reflects the screening flow rather than extended temperature range."},{"question":"Can TL082ACDT be used as a replacement for TL082CP?","answer":"The TL082ACDT is a surface-mount (8-SOIC) variant of the TL082 family, while the TL082CP is a DIP-8 through-hole package. Electrically they share the same core specifications (JFET input, 4 MHz GBW, 16 V/µs slew rate), but the package difference means they are not drop-in replacements on the same PCB footprint. The TL082ACDT also carries AEC-Q100 qualification, which the commercial-grade TL082CP typically does not."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/TL082ACDT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/TL082ACDT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}