{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL081HIDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL081HIDR","canonicalUrl":"https://icboms.com/texas-instruments/TL081HIDR","factsUrl":"https://icboms.com/api/mcp/products/TL081HIDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL081HIDR, JFET-input operational amplifier, single circuit, 5.25 MHz gain bandwidth, 20 V/µs slew rate, 1 pA input bias, 8-SOIC package, -40°C to 125°C.","salesMarkdown":"## What this JFET op-amp brings to the board The TL081HIDR is a single JFET-input operational amplifier from Texas Instruments in an 8-SOIC package. It delivers a 5.25 MHz gain-bandwidth product and a 20 V/µs slew rate, with a 1 pA input bias current that keeps high-impedance sensor signals clean. Supply range runs from 4.5 V to 40 V, and the push-pull output stage handles loads without external pull-up resistors. ## Slew rate and bandwidth — what they mean for signal fidelity The 20 V/µs slew rate supports 5.25 MHz gain-bandwidth product. For active filters or ADC driver stages, the 5.25 MHz GBW provides closed-loop gain before roll-off. 8-SOIC (3.90 mm width) — standard footprint, easy to hand-solder or hot-air rework. Pin 1 is clearly marked on the package top. Marked as Active in production — no end-of-life notice on this variant.","metaTitle":"TL081HIDR JFET Op-Amp, 5.25 MHz, 20 V/µs, 8-SOIC","metaDescription":"Active-production JFET op-amp from TI, single circuit, 5.25 MHz GBW, 20 V/µs slew rate, 1 pA input bias, 8-SOIC package, -40°C to 125°C. RoHS3 compliant.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"20V/µs","Output Type":"Push-Pull","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA","Number of Circuits":"1","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 125°C (TA)","Gain Bandwidth Product":"5.25 MHz","Voltage - Input Offset":"1 mV","Supplier Device Package":"8-SOIC","Voltage - Supply Span (Max)":"40 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.52","priceTiers":[{"qty":1,"price":"$0.52000","currency":"USD"},{"qty":10,"price":"$0.41800","currency":"USD"},{"qty":25,"price":"$0.38280","currency":"USD"},{"qty":100,"price":"$0.28490","currency":"USD"},{"qty":250,"price":"$0.25820","currency":"USD"},{"qty":500,"price":"$0.21370","currency":"USD"},{"qty":1000,"price":"$0.16027","currency":"USD"},{"qty":3000,"price":"$0.14692","currency":"USD"},{"qty":6000,"price":"$0.13801","currency":"USD"},{"qty":15000,"price":"$0.12911","currency":"USD"},{"qty":30000,"price":"$0.12600","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/bd0d2120e3c12ca626ffeb622ac6a207.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL081HIDR/alternatives.json"},"ai":{"faq":[{"question":"Is TL081HIDR RoHS compliant?","answer":"Yes, it is ROHS3 compliant, meeting the latest EU restriction levels for lead, mercury, cadmium, and other substances."},{"question":"Will TL081HIDR work as a replacement for TL081CP?","answer":"TL081CP is a DIP-8 package; TL081HIDR is surface-mount 8-SOIC. Electrically the JFET input stage and 5.25 MHz GBW are the same family, but the package is not pin-compatible for through-hole boards. For a direct SMD replacement, TL081HIDR works if the board layout accepts SOIC."},{"question":"What is the pinout of TL081HIDR?","answer":"Standard 8-SOIC op-amp pinout: pin 1 offset null, pin 2 inverting input, pin 3 non-inverting input, pin 4 V-, pin 5 offset null, pin 6 output, pin 7 V+, pin 8 NC. Pin 1 is marked on the package."},{"question":"When sourcing TL081HIDR, what's the closest functional second-source — TLV9351IDCKR?","answer":"The TLV9351IDCKR is a general-purpose rail-to-rail op-amp with 3.5 MHz GBW and 20 V/µs slew rate, but it has a CMOS input stage (10 pA bias) versus the JFET input (1 pA bias) of the TL081HIDR. For high-impedance sensor applications where picoamp bias matters, the TL081HIDR is the better fit. For rail-to-rail output and lower offset, the TLV9351IDCKR is an alternative."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL081HIDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL081HIDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}