{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL074IDRE4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL074IDRE4","canonicalUrl":"https://icboms.com/texas-instruments/TL074IDRE4","factsUrl":"https://icboms.com/api/mcp/products/TL074IDRE4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL074IDRE4, quad JFET-input operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 1.4mA per channel supply, 10V to 30V supply range, -40°C to 85°C, 14-SOIC package, Tape & Reel.","salesMarkdown":"It remains a current-production choice for new designs and replacement builds alike. ## 13V/µs slew rate and 3 MHz GBW — what they mean for signal conditioning With a 13V/µs slew rate and 3 MHz gain-bandwidth product, this quad JFET op-amp handles audio-band signals and moderate-speed sensor outputs without slew-induced distortion. The 13V/µs rate supports full-output swings up to roughly 200 kHz before the slew rate limits the large-signal bandwidth — adequate for audio preamps, active filters, and data-acquisition front ends. ## Supply current and voltage range — fitting the rail budget Each of the four amplifiers draws 1.4 mA, so the total quiescent supply current is 5.6 mA for the package. That is low enough to run from a 10 V to 30 V single supply (or ±5 V to ±15 V split rails) without burning the thermal budget in a 14-SOIC layout. The 3 mV typical input offset voltage is unremarkable for a general-purpose JFET op-amp; if the application demands sub-mV offset, a precision-grade sibling in the TL07x family would be the better fit. ## Industrial temperature range and 14-SOIC package","metaTitle":"TL074IDRE4 Quad JFET Op-Amp, 3 MHz GBW, 13V/µs Slew Rate","metaDescription":"Texas Instruments TL074IDRE4 quad JFET op-amp: 3 MHz GBW, 13V/µs slew rate, 1.4mA/ch supply, -40°C to 85°C. Active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR)","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x4 Channels)","Number of Circuits":"4","Base Product Number":"TL074","Current - Input Bias":"65 pA","Operating Temperature":"-40°C~85°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"14-SOIC","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL074IDRE4/alternatives.json"},"ai":{"faq":[{"question":"What is the closest pin-compatible alternative to TL074IDRE4?","answer":"Within the TL07x family, the TL074ID (same base number, same 14-SOIC package) is a direct functional equivalent. The 'R' suffix on TL074IDRE4 indicates Tape & Reel packaging; the TL074ID is typically supplied in tubes. Electrical specifications are identical."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL074IDRE4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL074IDRE4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}