{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL074IDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL074IDR","canonicalUrl":"https://icboms.com/texas-instruments/TL074IDR","factsUrl":"https://icboms.com/api/mcp/products/TL074IDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL074, J-FET quad op-amp, 3 MHz gain bandwidth, 13V/µs slew rate, 65 pA input bias, 1.4 mA per channel supply, 10 V to 30 V supply span, 14-SOIC, -40°C to 85°C.","salesMarkdown":"## J-FET input quad op-amp for industrial signal chains The Texas Instruments TL074IDR is a quad-channel J-FET input operational amplifier in a 14-SOIC package. Each of the four amplifiers draws 1.4 mA supply current, keeping the total quiescent draw at 5.6 mA for the whole device. The 13V/µs slew rate defines the large-signal risetime. For a 10 V p-p output step, the edge slews in about 770 ns — fast enough for audio line drivers and 100 kHz power-stage error amplifiers without significant slew-induced distortion. The 3 MHz gain-bandwidth product sets the small-signal closed-loop bandwidth at a given gain. At a gain of 10, the -3 dB point lands near 300 kHz, which is adequate for sensor conditioning loops and active filter stages in the tens-of-kilohertz range. This package survives hot-air rework well. The leads are on the outside, so you can get a fine-tip iron or a hot-air nozzle on all four sides without cooking the plastic body. No exposed pad underneath, so no risk of lifting a thermal pad during removal.","metaTitle":"TL074IDR J-FET Op-Amp, Quad, 3 MHz, 13V/µs, -40°C to 85°C","metaDescription":"Texas Instruments TL074IDR quad J-FET op-amp: 3 MHz GBW, 13V/µs slew rate, 65 pA input bias, 14-SOIC. Active production, sourced per RFQ. Industrial temp range.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x4 Channels)","Number of Circuits":"4","Base Product Number":"TL074","Current - Input Bias":"65 pA","Operating Temperature":"-40°C~85°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"14-SOIC","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.6100","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL074IDR/alternatives.json"},"ai":{"faq":[{"question":"Can TL074IDR replace TL074 or TL074CN?","answer":"TL074IDR is a surface-mount variant of the TL074 family in a 14-SOIC package. It is pin-compatible with other TL074 package options (DIP, SOIC) that share the same J-FET quad op-amp core. The base product number TL074 covers the whole family; the suffix IDR denotes the specific tape-and-reel SOIC variant."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL074IDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL074IDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}