{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL074CPW","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL074CPW","canonicalUrl":"https://icboms.com/texas-instruments/TL074CPW","factsUrl":"https://icboms.com/api/mcp/products/TL074CPW","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL074CPW, JFET quad operational amplifier, 3 MHz gain bandwidth, 13 V/µs slew rate, 65 pA input bias, 10 V to 30 V supply, 0°C to 70°C, 14-TSSOP surface mount package.","salesMarkdown":"## JFET quad op-amp for precision analog signal chains The Texas Instruments TL074CPW is a JFET-input quad operational amplifier in a 14-TSSOP surface-mount package. Four independent op-amps in one 14-TSSOP body save board area compared to four single-channel devices. ## Slew rate and bandwidth — what they mean for signal fidelity The 13 V/µs slew rate sets the large-signal bandwidth: a 10 V peak-to-peak output can swing cleanly up to roughly 200 kHz before slew-rate limiting distorts the waveform. For smaller signals the 3 MHz small-signal bandwidth is the limit. This combination suits audio processing, active filters, and general-purpose signal conditioning where the signal stays below a few hundred kilohertz. It belongs in indoor, temperature-controlled equipment — benchtop instruments, audio gear, office electronics — not in automotive under-hood or outdoor industrial enclosures without active cooling. 14-TSSOP with 0.65 mm pin pitch and 4.40 mm body width.","metaTitle":"TL074CPW JFET Quad Op-Amp, 3 MHz, 13 V/µs, 14-TSSOP","metaDescription":"Texas Instruments TL074CPW JFET quad op-amp: 3 MHz GBW, 13 V/µs slew rate, 65 pA input bias, 0°C–70°C, 14-TSSOP.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tube","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"14-TSSOP (0.173\\\", 4.40mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x4 Channels)","Number of Circuits":"4","Base Product Number":"TL074","Current - Input Bias":"65 pA","Operating Temperature":"0°C~70°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"14-TSSOP","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.1300","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL074CPW/alternatives.json"},"ai":{"faq":[{"question":"Can TL074CPW replace TL074CN?","answer":"The TL074CPW is the surface-mount 14-TSSOP variant of the TL074 family. The TL074CN is the DIP-14 through-hole version. Electrically they share the same JFET quad op-amp core — same 3 MHz GBW, 13 V/µs slew rate, 65 pA bias — but the package and footprint differ. A direct replacement requires a board layout change from DIP-14 to TSSOP-14."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL074CPW","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL074CPW when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}