{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL074CDG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL074CDG4","canonicalUrl":"https://icboms.com/texas-instruments/TL074CDG4","factsUrl":"https://icboms.com/api/mcp/products/TL074CDG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL074CDG4, JFET-input quad operational amplifier, 3 MHz gain bandwidth, 13 V/µs slew rate, 1.4 mA supply per channel, 14-SOIC surface mount, 0°C to 70°C operating temperature.","salesMarkdown":"The TL074CDG4 is a quad JFET-input operational amplifier from Texas Instruments, built around the classic TL074 architecture. Each of the four channels draws 1.4 mA supply current, keeping the total quiescent draw under 6 mA — a practical fit for multi-channel boards where the power budget is tight. ## Slew rate and bandwidth — the speed envelope The 13 V/µs slew rate sets the large-signal bandwidth ceiling: for a 10 V peak-to-peak output swing, the full-power bandwidth is roughly 200 kHz. Below that, the 3 MHz GBW governs small-signal gain. If your filter or amplifier needs to swing rail-to-rail above 100 kHz, the slew rate is the limiter, not the GBW. Input bias current is 65 pA typical, a direct benefit of the JFET input stage. That keeps offset drift low in high-impedance circuits like photodiode transimpedance amplifiers or sample-and-hold buffers. ## Supply range and temperature — fitting the board environment","metaTitle":"TL074CDG4 JFET Op-Amp, 3 MHz, 13 V/µs Slew Rate, Active","metaDescription":"Texas Instruments TL074CDG4 quad JFET op-amp: 3 MHz GBW, 13 V/µs slew rate, 1.4 mA supply, 14-SOIC.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tube","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x4 Channels)","Number of Circuits":"4","Base Product Number":"TL074","Current - Input Bias":"65 pA","Operating Temperature":"0°C~70°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"14-SOIC","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.1600","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL074CDG4/alternatives.json"},"ai":{"faq":[{"question":"What is the TL074CDG4's slew rate and why does it matter?","answer":"The slew rate is 13 V/µs. This determines how fast the output can swing under large-signal conditions — for a 10 V peak-to-peak output, the full-power bandwidth is about 200 kHz. If your application needs to reproduce fast edges or high-frequency signals at full amplitude, this is the limiting spec."},{"question":"Is there a pin-compatible alternative to the TL074CDG4?","answer":"The TL074 family includes several package and temperature variants. The TL074CN is the DIP-14 through-hole version; the TL074CD is the same SOIC-14 package but without the 'G4' RoHS designation. All share the same pinout and basic electrical characteristics — the choice is package and temperature range."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL074CDG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL074CDG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}