{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL074BCNSRE4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL074BCNSRE4","canonicalUrl":"https://icboms.com/texas-instruments/TL074BCNSRE4","factsUrl":"https://icboms.com/api/mcp/products/TL074BCNSRE4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL074BCNSRE4, JFET quad operational amplifier, 3 MHz gain bandwidth, 13 V/µs slew rate, 10 V to 30 V supply, 14-SOIC (5.30 mm width), 0°C to 70°C, Tape & Reel.","salesMarkdown":"It operates from a 10 V to 30 V total supply span — typically ±5 V to ±15 V split rails — and draws 1.4 mA per amplifier (5.6 mA total for all four channels). Input bias current is 65 pA typical, and input offset voltage is 2 mV typical, making it a good fit for audio preamplifiers, active filters, and general-purpose signal conditioning where low noise and high input impedance matter. TI lists the TL074BCNSRE4 as Obsolete. For existing BOM lines, procurement goes through the independent surplus and broker channel. The base product number is TL074. No official TI successor is recorded for this specific suffix variant. ## Supply span and temperature — design-in checklist The 10 V minimum supply span means the part runs on ±5 V rails or a single 10 V rail. The 30 V maximum span allows ±15 V rails — the classic split-supply range for audio and industrial signal chains. The 14-SOIC package (5.30 mm body width) uses the standard SOIC footprint for 14-lead wide-body op-amps. The Tape & Reel delivery suits automated pick-and-place assembly.","metaTitle":"TL074BCNSRE4 JFET Quad Op-Amp, 3 MHz, 13 V/µs, Obsolete","metaDescription":"Texas Instruments TL074BCNSRE4 JFET quad op-amp: 3 MHz GBW, 13 V/µs slew rate, 14-SOIC, 0°C to 70°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR)","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"14-SOIC (0.209\\\", 5.30mm Width)","Product Status":"Obsolete","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x4 Channels)","Number of Circuits":"4","Base Product Number":"TL074","Current - Input Bias":"65 pA","Operating Temperature":"0°C~70°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"2 mV","Supplier Device Package":"14-SO","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL074BCNSRE4/alternatives.json"},"ai":{"faq":[{"question":"What is the replacement for TL074BCNSRE4?","answer":"No official TI successor is recorded for this exact suffix variant. For a pin-compatible JFET quad op-amp in the same 14-SOIC package, consider the TL074 family in an active suffix — verify the temperature grade and package code against your BOM before substituting."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL074BCNSRE4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL074BCNSRE4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}