{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL074BCDRG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL074BCDRG4","canonicalUrl":"https://icboms.com/texas-instruments/TL074BCDRG4","factsUrl":"https://icboms.com/api/mcp/products/TL074BCDRG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL074BCDRG4, JFET-input quad operational amplifier, 4 circuits, 3 MHz gain bandwidth, 13 V/µs slew rate, supply 10 V to 30 V, 0°C to 70°C, 14-SOIC package, Tape & Reel.","salesMarkdown":"## JFET quad op-amp for signal-conditioning chains The TL074BCDRG4 is a quad JFET-input operational amplifier from Texas Instruments. Each amplifier draws 1.4 mA supply current, so the full quad runs at 5.6 mA quiescent — a reasonable budget for a four-channel signal-conditioning block on a mixed-signal board. Rated for supply spans from 10 V to 30 V (single or split), the TL074BCDRG4 fits into ±5 V to ±15 V rails common in analog designs. ## JFET input — low bias current matters Input bias current is 65 pA typical, a direct benefit of the JFET front end. That matters when the op-amp interfaces with high-impedance sources — photodiodes, piezoelectric sensors, or precision voltage dividers — where a bipolar input stage would inject enough current to shift the DC operating point. Input offset voltage is 2 mV typical, which is adequate for general-purpose amplification; designs that need sub-mV offset should budget for the TL074AC or a precision JFET op-amp family.","metaTitle":"TL074BCDRG4 JFET Quad Op-Amp, 3 MHz, 13 V/µs Slew Rate","metaDescription":"TL074BCDRG4 quad JFET op-amp from Texas Instruments. 3 MHz GBW, 13 V/µs slew rate, 65 pA bias current. 4 channels in SOIC-14.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR)","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x4 Channels)","Number of Circuits":"4","Base Product Number":"TL074","Current - Input Bias":"65 pA","Operating Temperature":"0°C~70°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"2 mV","Supplier Device Package":"14-SOIC","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.9700","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL074BCDRG4/alternatives.json"},"ai":{"faq":[{"question":"How many channels and what amplifier type is TL074BCDRG4?","answer":"It is a quad JFET-input operational amplifier — four independent channels in one package."},{"question":"What is the slew rate of TL074BCDRG4?","answer":"Slew rate is 13 V/µs typical, which supports large-signal bandwidth up to several hundred kHz depending on the closed-loop gain."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL074BCDRG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL074BCDRG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}