{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL074ACDRG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL074ACDRG4","canonicalUrl":"https://icboms.com/texas-instruments/TL074ACDRG4","factsUrl":"https://icboms.com/api/mcp/products/TL074ACDRG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL074ACDRG4, JFET-input quad operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 1.4 mA supply current per quad, 65 pA input bias current, 14-SOIC package, 0°C to 70°C operating temperature.","salesMarkdown":"Its 3 MHz gain-bandwidth product and 13V/µs slew rate support signal conditioning up to several hundred kilohertz before gain roll-off limits the bandwidth. ## Supply budget and input characteristics Each of the four amplifiers draws 1.4 mA, totalling 5.6 mA for the package — a reasonable quiescent budget for a multi-channel board where the op-amp power isn't the dominant rail load. Input bias current is 65 pA typical, a direct benefit of the JFET input stage. That keeps voltage error low when the source impedance is high — think photodiode transimpedance stages or pH probe buffers where a bipolar op-amp's nanoamp bias would swamp the signal. For a general-purpose quad this is unremarkable; if the application requires sub-millivolt precision, a trim or a chopper-stabilised part is the better fit. It is RoHS compliant, as the 'G4' suffix indicates, so it passes the typical restricted-substance screening for new designs.","metaTitle":"TL074ACDRG4 JFET Op-Amp, 3 MHz, 13V/µs, 14-SOIC","metaDescription":"Texas Instruments TL074ACDRG4 quad JFET op-amp: 3 MHz GBW, 13V/µs slew rate, 1.4 mA supply per quad, 65 pA bias current. 14-SOIC, 0°C to 70°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR)","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x4 Channels)","Number of Circuits":"4","Base Product Number":"TL074","Current - Input Bias":"65 pA","Operating Temperature":"0°C~70°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"14-SOIC","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.3000","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL074ACDRG4/alternatives.json"},"ai":{"faq":[{"question":"What is the slew rate of TL074ACDRG4?","answer":"The TL074ACDRG4 has a typical slew rate of 13V/µs. This determines the maximum output voltage swing before distortion at high frequencies; for a 10 V peak-to-peak output, the full-power bandwidth is roughly 207 kHz."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL074ACDRG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL074ACDRG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}