{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL072IPG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL072IPG4","canonicalUrl":"https://icboms.com/texas-instruments/TL072IPG4","factsUrl":"https://icboms.com/api/mcp/products/TL072IPG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL072 series, J-FET Amplifier, 2 Circuit, 8-PDIP (0.300\", 7.62mm), Through Hole, Slew Rate 13V/µs, Gain Bandwidth Product 3 MHz, Supply Current 1.4mA (x2 Channels), Operating Temperature -40°C~85°C.","salesMarkdown":"The TL072IPG4 is a dual J-FET input operational amplifier from Texas Instruments in the TL072 family. Each of the two amplifiers draws 1.4 mA supply current, so the whole package consumes 2.8 mA quiescent — low enough for multi-channel boards without a thermal headache. That covers audio-band signals cleanly and leaves headroom for fast-settling analog multiplexers or sample-and-hold stages. That covers most bench, lab, and factory-floor environments without needing a military-grade part. Input bias current is 65 pA typical — the J-FET front end keeps the DC error low even with high-source-impedance sensors or feedback networks. ## Package and mounting — through-hole still has a place Housed in an 8-pin PDIP (0.300-inch body), the TL072IPG4 is a through-hole part. That means hand-prototyping, breadboarding, and socketed test fixtures are straightforward.","metaTitle":"TL072IPG4 J-FET Op-Amp, 3 MHz GBW, 13 V/µs Slew Rate, 8-PDIP","metaDescription":"Texas Instruments TL072IPG4 dual J-FET op-amp: 3 MHz gain bandwidth, 13 V/µs slew rate, 65 pA input bias, 1.4 mA per channel supply.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tube","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x2 Channels)","Number of Circuits":"2","Base Product Number":"TL072","Current - Input Bias":"65 pA","Operating Temperature":"-40°C~85°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"8-PDIP","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.9500","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL072IPG4/alternatives.json"},"ai":{"faq":[{"question":"Can I use TL072IPG4 instead of TL072CP?","answer":"The TL072IPG4 and TL072CP are functionally identical — same dual J-FET amplifier, same 3 MHz GBW, same 13 V/µs slew rate, same 8-pin DIP footprint. The suffix difference usually reflects packaging or environmental rating; verify the operating temperature range matches your application. Both are active, so either can be sourced."},{"question":"What is the equivalent of TL072IPG4?","answer":"The TL072 family includes multiple suffix variants (TL072CP, TL072IP, TL072ACD, etc.) that are pin-compatible and electrically equivalent. The TL072IPG4 is the through-hole PDIP version with industrial temperature range. Any TL072 variant in the same package and temperature grade is a direct substitute."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL072IPG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL072IPG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}