{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL072HIDDFR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL072HIDDFR","canonicalUrl":"https://icboms.com/texas-instruments/TL072HIDDFR","factsUrl":"https://icboms.com/api/mcp/products/TL072HIDDFR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL072HIDDFR dual CMOS operational amplifier, 5.25 MHz gain bandwidth, 20 V/µs slew rate, 1 mV input offset, TSOT-23-8 surface-mount package, Tape & Reel.","salesMarkdown":"## CMOS input stage — where the 1 pA bias matters The TL072HIDDFR: The CMOS front end delivers 1 pA typical input bias current. In a high-impedance sensor front-end — a photodiode transimpedance amplifier or a pH probe buffer — that bias level means the voltage error across a 10 MΩ source resistor stays under 10 µV, negligible against the 1 mV input offset. The bias current doubles roughly every 10°C, but even at 125°C it remains in the tens of pA range, well below what a bipolar-input op-amp would leak. Supply current is 937.5 µA per channel — the dual package draws under 2 mA total. For a battery-powered data logger that runs the op-amp continuously, that quiescent draw is the floor the system sees even with no signal. ## Slew rate and gain bandwidth — signal chain ceiling 20 V/µs slew rate paired with 5.25 MHz gain-bandwidth product sets the large-signal bandwidth. Below that amplitude, the small-signal -3 dB point is the GBW divided by the noise gain. A unity-gain buffer sees the full 5.25 MHz; a gain-of-10 stage rolls off at 525 kHz. The 26 mA output current per channel drives a 50 Ω load to about ±1.3 V or a 600 Ω load to ±15.6 V — adequate for driving an ADC input or a downstream stage, but not a heavy cable or a transformer-coupled line. For a 100 pF load, the phase margin is typically 45°, so a small series resistor (50-100 Ω) at the output prevents peaking in the frequency response. ## TSOT-23-8 package — board-fit constraints The TL072HIDDFR ships in a TSOT-23-8 package, a 2.9 mm × 1.6 mm body with 0.65 mm pin pitch. The SOT-23-8 footprint is standard — the same land pattern serves the LM6152ACMX/NOPB which also comes in a similar SOT-23-8 variant. No re-spin is needed if the board was laid out for that peer, though the LM6152's 80 MHz GBW and 30 V/µs slew rate are significantly faster, so the TL072HIDDFR is a drop-in replacement only if the signal bandwidth requirement is lower. In an under-hood ECU or an outdoor sensor node that sees 105°C on a summer day, the part stays within its rated junction temperature without derating.","metaTitle":"TL072HIDDFR CMOS Op-Amp, 5.25 MHz, 20 V/µs, TSOT-23-8","metaDescription":"Texas Instruments TL072HIDDFR dual CMOS op-amp: 5.25 MHz GBW, 20 V/µs slew rate, 1 pA input bias, -40 to 125°C. Active production, ROHS3. Sourced per RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR) Cut Tape (CT)","Slew Rate":"20V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"CMOS","Package / Case":"SOT-23-8","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"937.5µA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"1 pA","Operating Temperature":"-40°C ~ 125°C (TA)","Gain Bandwidth Product":"5.25 MHz","Voltage - Input Offset":"1 mV","Supplier Device Package":"TSOT-23-8","Current - Output / Channel":"26 mA","Voltage - Supply Span (Max)":"40 V","Voltage - Supply Span (Min)":"4.5 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.4100","priceTiers":[{"qty":1,"price":"$0.41000","currency":"USD"},{"qty":10,"price":"$0.33500","currency":"USD"},{"qty":25,"price":"$0.30640","currency":"USD"},{"qty":100,"price":"$0.22810","currency":"USD"},{"qty":250,"price":"$0.20676","currency":"USD"},{"qty":500,"price":"$0.17112","currency":"USD"},{"qty":1000,"price":"$0.12833","currency":"USD"},{"qty":3000,"price":"$0.11764","currency":"USD"},{"qty":6000,"price":"$0.11051","currency":"USD"},{"qty":15000,"price":"$0.10338","currency":"USD"},{"qty":30000,"price":"$0.09482","currency":"USD"},{"qty":75000,"price":"$0.09126","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/df08ab8a1490d59ff53623802a48a763.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL072HIDDFR/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Texas Instruments provide for TL072HIDDFR?","answer":"The TL072HIDDFR is ROHS3 compliant. Texas Instruments provides the standard RoHS and REACH declarations, plus the product datasheet. No UL or IEC certification is listed for this part."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL072HIDDFR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL072HIDDFR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}