{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL072CPWRE4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL072CPWRE4","canonicalUrl":"https://icboms.com/texas-instruments/TL072CPWRE4","factsUrl":"https://icboms.com/api/mcp/products/TL072CPWRE4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL072 series, J-FET Amplifier, 2 Circuit, 3 MHz gain bandwidth, 13V/µs slew rate, 1.4 mA supply per channel, 8-TSSOP package, surface mount, 0°C to 70°C operating temperature.","salesMarkdown":"## 13V/µs slew rate — what it buys the signal path Its 13V/µs slew rate supports clean large-signal response up to several hundred kilohertz, making it a fit for audio preamplifiers, active filters, and fast-settling analog stages where a general-purpose 741-type op-amp would round the edges. ## 3 MHz gain bandwidth — usable frequency range With a 3 MHz gain-bandwidth product, this part delivers a closed-loop bandwidth of 300 kHz at a gain of 10, or 30 kHz at a gain of 100. That is sufficient for audio-band processing and moderate-speed instrumentation; for video or RF paths you would step up to a wider-bandwidth amplifier. ## Supply current and voltage range Each of the two amplifiers draws 1.4 mA supply current, for a total of 2.8 mA for the dual package. The supply span is rated from 10 V to 30 V, accommodating single-supply rails from 10 V to 30 V or split supplies like ±5 V to ±15 V without a separate regulator. ## JFET input characteristics The JFET input stage gives a typical input bias current of 65 pA and an input offset voltage of 3 mV. These numbers mean the TL072CPWRE4 is well suited for high-impedance sensor interfaces and precision integrators where bipolar-input op-amps would load the source. Housed in an 8-TSSOP package (4.40 mm width, 0.173\" body), this is a surface-mount part intended for automated assembly.","metaTitle":"TL072CPWRE4 Texas Instruments JFET Op-Amp, 3 MHz, 13V/µs","metaDescription":"TL072CPWRE4 dual JFET op-amp from TI: 3 MHz GBW, 13V/µs slew rate, 1.4 mA per channel supply. 8-TSSOP package, active lifecycle.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"8-TSSOP (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x2 Channels)","Number of Circuits":"2","Base Product Number":"TL072","Current - Input Bias":"65 pA","Operating Temperature":"0°C~70°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"8-TSSOP","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.8300","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL072CPWRE4/alternatives.json"},"ai":{"faq":[{"question":"Is TL072CPWRE4 obsolete?","answer":"No. The TL072CPWRE4 is listed with an active product status. There is no indication of obsolescence or a last-time-buy event."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL072CPWRE4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL072CPWRE4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}