{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL072CP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL072CP","canonicalUrl":"https://icboms.com/texas-instruments/TL072CP","factsUrl":"https://icboms.com/api/mcp/products/TL072CP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL072CP, dual JFET-input operational amplifier, 3 MHz gain bandwidth, 13 V/µs slew rate, 65 pA input bias, 1.4 mA per channel supply, 8-DIP through-hole package, 0°C to 70°C temperature range.","salesMarkdown":"## Dual JFET op-amp in a through-hole DIP — what you're getting The Texas Instruments TL072CP is a dual JFET-input operational amplifier in an 8-pin DIP package (8-DIP, 0.300\" body width). Input bias current is 65 pA typical, which matters when you're buffering a high-impedance source like a piezo sensor or a photodiode without loading it down. Each of the two amplifiers draws 1.4 mA supply current, so the whole package runs under 3 mA quiescent. Supply span runs from 10 V to 30 V — single or split rails. The 3 mV input offset voltage (typical) is adequate for audio line-level work and general-purpose filtering, though you'd reach for a precision part if you're amplifying microvolt-level signals. That means this part belongs in indoor, temperature-controlled equipment: audio mixers, bench instruments, consumer electronics, office gear. It is not rated for the engine bay, an outdoor telecom cabinet, or a factory floor that sees freezing starts. If your BOM calls for -40°C operation, you need an industrial-grade JFET op-amp like the TLV9362 or a similar extended-temp part. ## Lifecycle reality — obsolete, sourced through independent channels The TL072CP is marked obsolete by Texas Instruments. That means TI no longer manufactures or accepts orders for this specific through-hole variant. There is no official TI successor order code for the TL072CP listed in the lifecycle record — the broader TL072 family continues in surface-mount packages (SOIC-8, TSSOP-8), but the DIP-8 version is end-of-life. Sourcing now runs through independent distribution and the surplus market. ## Package and assembly fit Through-hole 8-DIP (0.300\" row spacing, 7.62 mm body width). No MSL rating to worry about — DIP packages are moisture-insensitive and survive reflow or hand-solder without a bake step. The tube shipping medium is standard for DIP parts; pick-and-place requires a tube feeder or manual insertion. If your production line is all surface-mount, the TL072CD (SOIC-8) or TL072ID (SOIC-8) are the same die in a reflow-friendly package.","metaTitle":"TL072CP JFET Op-Amp, Dual 3 MHz, 13V/µs, DIP-8","metaDescription":"TL072CP dual JFET op-amp, 3 MHz GBW, 13V/µs slew rate, 65 pA bias, 1.4mA supply. 8-DIP through-hole. Request quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Obsolete","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tube","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-DIP (0.300\\\", 7.62mm)","Product Status":"Active","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x2 Channels)","Number of Circuits":"2","Base Product Number":"TL072","Current - Input Bias":"65 pA","Operating Temperature":"0°C~70°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"8-PDIP","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.4300","priceTiers":[{"qty":1,"price":"$1.02000","currency":"USD"},{"qty":10,"price":"$0.91000","currency":"USD"},{"qty":25,"price":"$0.86360","currency":"USD"},{"qty":100,"price":"$0.70950","currency":"USD"},{"qty":250,"price":"$0.66320","currency":"USD"},{"qty":500,"price":"$0.58608","currency":"USD"},{"qty":1000,"price":"$0.46269","currency":"USD"},{"qty":2500,"price":"$0.43650","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL072CP/alternatives.json"},"ai":{"faq":[{"question":"What is the replacement for TL072CP?","answer":"There is no official TI successor order code for the through-hole TL072CP. For a surface-mount replacement, the TL072CD (SOIC-8) or TL072ID (SOIC-8) use the same JFET op-amp core. For a through-hole alternative with similar JFET input characteristics, consider the TL082CP (also dual JFET, similar speed) or the LF353N — both are common DIP-8 parts with comparable slew rate and bandwidth. Verify pin compatibility and supply voltage range against your design."},{"question":"Is TL072CP equivalent to TL072?","answer":"The TL072CP is a specific variant of the TL072 family — the 'C' suffix indicates commercial temperature range (0°C to 70°C) and the 'P' suffix indicates the 8-pin DIP through-hole package. The base TL072 die and electrical characteristics (JFET input, 3 MHz GBW, 13 V/µs slew rate) are the same across the TL072 family. The TL072CP is electrically equivalent to other TL072 variants in the same temperature grade, differing only in package and temperature range."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL072CP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL072CP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-16T10:39:33.080Z","lastPublished":"2026-07-16T10:39:33.080Z","indexable":true}}