{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL072BCPG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL072BCPG4","canonicalUrl":"https://icboms.com/texas-instruments/TL072BCPG4","factsUrl":"https://icboms.com/api/mcp/products/TL072BCPG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL072BCPG4, dual JFET-input operational amplifier, 3 MHz gain bandwidth, 13V/µs slew rate, 1.4 mA supply per two channels, 8-PDIP through-hole package, 0°C to 70°C commercial temperature range.","salesMarkdown":"## 13V/µs slew rate — what it buys you A 13V/µs slew rate means this op-amp can swing a 10 V peak-to-peak output at frequencies up to roughly 200 kHz before the output becomes slew-rate limited. For audio line-level signals (typically 2 V p-p), the full bandwidth extends well into the hundreds of kilohertz, making it a good fit for audio preamplifiers, active filters, and signal conditioning stages where preserving signal edges matters. ## Supply range and current — design margin notes The TL072BCPG4 operates from a total supply span of 10 V to 30 V, which accommodates common ±5 V, ±12 V, and ±15 V split rails. At 1.4 mA total supply current for both amplifiers, the quiescent power dissipation stays under 50 mW on ±15 V rails — low enough that the 8-PDIP package does not need heatsinking in normal ambient conditions.","metaTitle":"TL072BCPG4 JFET Op-Amp, 13V/µs Slew Rate, 8-PDIP","metaDescription":"Texas Instruments TL072BCPG4 dual JFET op-amp, 3 MHz GBW, 13V/µs slew rate, 65 pA bias, 0-70°C, 8-PDIP.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tube","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x2 Channels)","Number of Circuits":"2","Base Product Number":"TL072","Current - Input Bias":"65 pA","Operating Temperature":"0°C~70°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"2 mV","Supplier Device Package":"8-PDIP","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.3100","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL072BCPG4/alternatives.json"},"ai":{"faq":[{"question":"What is the slew rate of TL072BCPG4?","answer":"The TL072BCPG4 has a slew rate of 13V/µs."},{"question":"What is the difference between TL072BCPG4 and TL072CP?","answer":"Both are dual JFET op-amps in the TL072 family. The TL072BCPG4 is the 'B-grade' version with tighter input offset voltage specification (2 mV max) compared to the standard TL072CP. Both share the same pinout and are functionally interchangeable in most circuits, but the B-grade offers improved DC precision."},{"question":"Is TL072BCPG4 pin compatible with TL072?","answer":"Yes, the TL072BCPG4 uses the standard TL072 pinout. It is a drop-in replacement for any TL072-family device in an 8-pin DIP package."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL072BCPG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL072BCPG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}