{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL072ACN","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"TL072ACN","canonicalUrl":"https://icboms.com/stmicroelectronics/TL072ACN","factsUrl":"https://icboms.com/api/mcp/products/TL072ACN","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL072ACN, dual JFET-input operational amplifier, 4 MHz gain-bandwidth product, 16 V/µs slew rate, 1.4 mA supply per channel, 8-DIP through-hole package, 0°C to 70°C operating range.","salesMarkdown":"The TL072ACN is a dual JFET-input operational amplifier from TI's long-running TL072 family. Its 16 V/µs slew rate and 4 MHz gain-bandwidth product give it the large-signal bandwidth to handle audio-frequency signals and fast analog control loops without the input bias current penalty of a bipolar op-amp. Each amplifier draws 1.4 mA supply current, making this a low-power choice for multi-channel signal conditioning where a single 8-DIP package carries two independent JFET stages. ## AEC-Q100 grade — automotive qualification on a commercial-temperature part That combination suggests it was qualified for automotive infotainment or cabin electronics where the ambient stays within 70°C, not under-hood or engine-bay environments.","metaTitle":"TL072ACN dual JFET op-amp, 16 V/µs slew rate, obsolete","metaDescription":"TL072ACN dual JFET-input op-amp, 4 MHz GBW, 16 V/µs slew rate, 1.4 mA supply per channel. AEC-Q100 qualified.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"STMicroelectronics","Grade":"Automotive","Series":"-","Package":"Tube","Slew Rate":"16V/µs","Output Type":"-","Mounting Type":"Through Hole","Qualification":"AEC-Q100","Amplifier Type":"J-FET","Package / Case":"8-DIP (0.300\\\", 7.62mm)","Product Status":"Obsolete","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA","Number of Circuits":"2","Base Product Number":"TL072","Current - Input Bias":"20 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"4 MHz","Voltage - Input Offset":"6 mV","Supplier Device Package":"8-Mini DIP","Current - Output / Channel":"40 mA","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"6 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/dfc76cb6f937b627f7946d64d2857e31.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL072ACN/alternatives.json"},"ai":{"faq":[{"question":"What is the difference between TL072ACN and TL072BCN?","answer":"The TL072ACN and TL072BCN share the same 4 MHz GBW, 16 V/µs slew rate, and JFET input stage. The BCN suffix typically specifies a tighter input offset voltage grade — the ACN has a 6 mV maximum input offset voltage. Both are obsolete; the BCN variant may carry a different temperature grade or qualification tier."},{"question":"What is the closest pin-compatible alternative to the TL072ACN?","answer":"Within the TL072 family, the TL072CP (commercial DIP-8) and TL072IP (industrial DIP-8) are pin-compatible JFET dual op-amps with the same 4 MHz GBW and 16 V/µs slew rate. Neither carries the AEC-Q100 qualification. For an automotive-grade alternative, the TL072AQDRQ1 (SOIC-8) is a qualified replacement but has a different footprint."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/TL072ACN","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/TL072ACN when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}