{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL072ACDRG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL072ACDRG4","canonicalUrl":"https://icboms.com/texas-instruments/TL072ACDRG4","factsUrl":"https://icboms.com/api/mcp/products/TL072ACDRG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL072ACDRG4, dual JFET-input operational amplifier, 3 MHz gain bandwidth, 13 V/µs slew rate, 10 V to 30 V supply, 8-SOIC package, 0°C to 70°C temperature range.","salesMarkdown":"Each of the two amplifiers draws 1.4 mA supply current, keeping the total quiescent draw under 3 mA for the whole package. That makes it a practical choice for multi-channel boards where the op-amp bank must not dominate the power budget. The supply span runs from 10 V minimum to 30 V maximum, accommodating both split-rail (±5 V to ±15 V) and single-supply designs at 12 V or 24 V. This part is specified for indoor, temperature-controlled environments — office equipment, benchtop instruments, and consumer audio — not for automotive or outdoor industrial use without additional qualification testing. ## Package and lifecycle Housed in an 8-pin SOIC package (body 3.90 mm wide, 0.154\" profile) and supplied on Tape & Reel for automated assembly. The G4 suffix indicates a halogen-free, RoHS-compliant finish, which satisfies the material declaration requirements for most commercial and industrial BOMs.","metaTitle":"TL072ACDRG4 JFET Op-Amp, 13 V/µs Slew Rate, 8-SOIC","metaDescription":"Texas Instruments TL072ACDRG4 dual JFET op-amp, 3 MHz GBW, 13 V/µs slew rate, 10-30 V supply. Active production, 8-SOIC, 0°C to 70°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tape & Reel (TR)","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA (x2 Channels)","Number of Circuits":"2","Base Product Number":"TL072","Current - Input Bias":"65 pA","Operating Temperature":"0°C~70°C(TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"8-SOIC","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.9200","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL072ACDRG4/alternatives.json"},"ai":{"faq":[{"question":"Can TL072ACDRG4 replace TL072ACD?","answer":"Yes — TL072ACDRG4 is the Tape & Reel variant of the same base part (TL072). The die, package, and electrical ratings are identical; the only difference is the shipping medium (reel vs tube). A direct drop-in replacement for the TL072ACD in pick-and-place lines."},{"question":"What is the difference between TL072ACDRG4 and TL072ACP?","answer":"The TL072ACP is the same dual JFET op-amp in a PDIP-8 through-hole package, while the TL072ACDRG4 is in an SOIC-8 surface-mount package. Electrical specs are the same; the choice is purely board-assembly method."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL072ACDRG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL072ACDRG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}