{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL071BCD","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL071BCD","canonicalUrl":"https://icboms.com/texas-instruments/TL071BCD","factsUrl":"https://icboms.com/api/mcp/products/TL071BCD","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL071BCD, JFET input op-amp, single circuit, 3 MHz gain bandwidth, 13V/µs slew rate, 8-SOIC surface mount package, 0°C to 70°C operating temperature, tube packaging.","salesMarkdown":"## JFET op-amp in an 8-SOIC — what the 13V/µs slew rate buys you The TL071BCD is a single-channel JFET-input operational amplifier from Texas Instruments' TL071 family, packaged in an 8-SOIC (3.90 mm width) for surface-mount assembly. Its 13V/µs slew rate and 3 MHz gain-bandwidth product suit it for audio signal conditioning, active filters, and general-purpose precision analog stages where the JFET input stage's 65 pA input bias current preserves signal integrity from high-impedance sources. ## 3 MHz GBW and 13V/µs — the dynamic range ceiling The 3 MHz gain-bandwidth product sets the small-signal bandwidth: at a closed-loop gain of 10, the -3 dB point lands around 300 kHz. The 1.4 mA supply current per amplifier keeps the thermal budget modest in the 8-SOIC package, even on a 4-layer board with limited copper pour. ## Last Buy — the procurement window is closing This is not an NRND or active part — it is in the final procurement phase. It is not rated for -40°C automotive or outdoor telecom enclosures. The 2 mV input offset voltage (typical) and JFET input stage keep DC errors low enough for most precision analog circuits within this temperature envelope.","metaTitle":"TL071BCD JFET Op-Amp, 13V/µs Slew Rate, 8-SOIC, Last Buy","metaDescription":"TL071BCD JFET op-amp by Texas Instruments. 3 MHz GBW, 13V/µs slew rate, 65 pA input bias. 8-SOIC, 0-70°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Last Buy","categoryPath":["Analog & Data Acquisition"],"specifications":{"Mfr":"Texas Instruments","Series":"-","Package":"Tube","Slew Rate":"13V/µs","Output Type":"-","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Last Time Buy","lifecycle_stage":"eol_hot","Current - Supply":"1.4mA","Number of Circuits":"1","Base Product Number":"TL071","Current - Input Bias":"65 pA","Operating Temperature":"0°C~70°C","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"2 mV","Supplier Device Package":"8-SOIC","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.3700","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL071BCD/alternatives.json"},"ai":{"faq":[{"question":"What is the replacement for TL071BCD?","answer":"No direct replacement is listed on the TL071BCD record. These share the same JFET input stage and 3 MHz GBW, but verify package footprint (8-SOIC vs DIP) and temperature grade before substituting. No official pin-compatible successor is confirmed."},{"question":"What are the specifications of TL071BCD?","answer":"Tube packaging."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL071BCD","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL071BCD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T18:03:28.771Z","lastPublished":"2026-07-22T18:03:28.771Z","indexable":true}}