{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL064CDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL064CDR","canonicalUrl":"https://icboms.com/texas-instruments/TL064CDR","factsUrl":"https://icboms.com/api/mcp/products/TL064CDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL064CDR, JFET-input quad operational amplifier, 1 MHz gain bandwidth, 3.5 V/µs slew rate, 200 µA supply per channel, 14-SOIC surface-mount package, 0°C to 70°C operating temperature.","salesMarkdown":"## Quad JFET op-amp for low-power signal conditioning The JFET input stage delivers 30 pA input bias current, which keeps the voltage error small when the source impedance is high — think photodiode transimpedance stages, piezo sensor buffers, or precision integrators where a bipolar input's base current would swamp the signal. Each of the four amplifiers draws 200 µA of supply current, so the whole package runs under 1 mA quiescent. That makes this a good fit for multi-channel battery-powered instruments or any board where the op-amp rail budget is tight. The slew rate limits the large-signal bandwidth to roughly 55 kHz at 10 V peak-to-peak output. For audio or low-frequency instrumentation loops that's fine; for a switching waveform or a fast ADC driver you'll want a faster part. The 20 mA per-channel output drive is adequate for driving the feedback network and a following stage, but don't count on it for a 50 Ω line or a heavy capacitive load without a series resistor. If the board sees an engine bay, a rooftop enclosure, or a freezer, step up to the industrial-grade TL064 variant.","metaTitle":"TL064CDR Texas Instruments JFET Op-Amp, 1 MHz, 3.5 V/µs","metaDescription":"TL064CDR quad JFET op-amp from TI. 1 MHz GBW, 3.5 V/µs slew rate, 200 µA per channel supply. 14-SOIC, 0°C to 70°C. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"3.5V/µs","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"200µA (x4 Channels)","Number of Circuits":"4","Current - Input Bias":"30 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"14-SOIC","Current - Output / Channel":"20 mA","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.54","priceTiers":[{"qty":1,"price":"$0.54000","currency":"USD"},{"qty":10,"price":"$0.46100","currency":"USD"},{"qty":25,"price":"$0.43040","currency":"USD"},{"qty":100,"price":"$0.34430","currency":"USD"},{"qty":250,"price":"$0.31968","currency":"USD"},{"qty":500,"price":"$0.27052","currency":"USD"},{"qty":1000,"price":"$0.20903","currency":"USD"},{"qty":2500,"price":"$0.19059","currency":"USD"},{"qty":5000,"price":"$0.17829","currency":"USD"},{"qty":12500,"price":"$0.17400","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/3a60ba911aa46279168e1c34f4f0bf6f.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL064CDR/alternatives.json"},"ai":{"faq":[{"question":"What is the slew rate of TL064CDR?","answer":"The TL064CDR has a slew rate of 3.5 V/µs. This is a modest figure — adequate for audio and low-frequency instrumentation, but not suited for fast pulse or high-speed ADC drive applications."},{"question":"Can TL064CDR replace TL064CN?","answer":"The TL064CDR is the surface-mount 14-SOIC variant of the same TL064 quad JFET op-amp family. The TL064CN is the DIP-14 through-hole version. Electrically they are the same die; the difference is the package and the temperature range. The CDR is the commercial-temperature (0°C to 70°C) surface-mount option. If your board uses the SOIC footprint, the CDR is a direct functional replacement for the CN."},{"question":"What is the price of TL064CDR?","answer":"Current pricing for the TL064CDR is confirmed at quote time. Submit an RFQ through this listing and availability and the per-unit price for your quantity will be provided."},{"question":"Does TL064CDR have an equivalent part?","answer":"The TL064CDR is a JFET-input quad op-amp. A true pin-compatible second source is not listed in the available cross-reference data. Parts like the OPA4374 (CMOS, rail-to-rail output) or the INA4290 (current-sense amplifier) serve different application roles and are not drop-in equivalents. Stick with the TL064 family for a JFET input stage with the same pinout."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL064CDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL064CDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}