{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL061CJG","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL061CJG","canonicalUrl":"https://icboms.com/texas-instruments/TL061CJG","factsUrl":"https://icboms.com/api/mcp/products/TL061CJG","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL061CJG, JFET-input operational amplifier, 1 MHz gain bandwidth, 3.5 V/µs slew rate, 200 µA supply current, 30 pA input bias, single channel, 8-CDIP (0.300\", 7.62mm) through-hole package, 0°C to 70°C operating temperature.","salesMarkdown":"It delivers a 1 MHz gain-bandwidth product with a 3.5 V/µs slew rate while drawing only 200 µA of supply current. The JFET input stage provides 30 pA typical input bias current, making it suitable for high-impedance signal conditioning, precision integrators, and low-level sensor amplification in temperature-controlled environments (0°C to 70°C). The TL061CJG operates from a total supply span of 10 V to 30 V, which means it can run on ±5 V to ±15 V dual supplies or a single 10 V to 30 V rail. The 200 µA typical quiescent current keeps the power dissipation low — useful in multi-channel boards where thermal budget is tight. For a ±15 V supply, the total draw is about 6 mW per amplifier, so a dozen of these on a card still stay under 75 mW of op-amp quiescent loss. The 8-CDIP (0.300\", 7.62mm) is a through-hole ceramic dual-in-line package. It is not compatible with standard lead-free reflow profiles — the package body is hermetic, but the leads are tin/lead solder-dipped (RoHS non-compliant per). For new designs, this means hand-soldering or wave-solder assembly only, and the board must accept leaded solder. If you are retrofitting a legacy board that originally used a plastic DIP, the pinout is the same, but the 0.300\" width matches standard 8-pin DIP sockets. ## Lifecycle and sourcing — active but niche However, the CDIP package and RoHS non-compliant finish limit its production volume — it is not a high-volume surface-mount part. Expect availability through independent distribution rather than factory-direct in large tape-and-reel quantities. If your design can tolerate a plastic DIP or SOIC package, the commercial-grade TL061 variants (e.g., TL061CP) share the same electrical specs and are more readily stocked.","metaTitle":"TL061CJG JFET Op-Amp, 1 MHz GBW, 3.5 V/µs, 8-CDIP","metaDescription":"TL061CJG JFET op-amp: 1 MHz GBW, 3.5 V/µs slew rate, 200 µA supply, 30 pA bias, 8-CDIP hermetic package.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Bulk","Slew Rate":"3.5V/µs","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-CDIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"200µA","Number of Circuits":"1","Current - Input Bias":"30 pA","Operating Temperature":"0°C ~ 70°C (TA)","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"8-CDIP","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.84","stockQuantity":0,"priceTiers":[{"qty":163,"price":"$1.84000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/94c538a74e7aec3bff562eaebea1af2c.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the gain bandwidth of TL061CJG?","answer":"The TL061CJG has a gain-bandwidth product of 1 MHz. This sets the small-signal bandwidth at unity gain; for closed-loop gains above unity, the usable bandwidth is 1 MHz divided by the noise gain. For example, at a gain of 10, the -3 dB bandwidth is approximately 100 kHz."},{"question":"Is TL061CJG equivalent to TL061BCP?","answer":"The TL061BCP is the plastic DIP version of the same JFET op-amp die. Electrically, both share the same 1 MHz GBW, 3.5 V/µs slew rate, 200 µA supply current, and 30 pA input bias. The difference is the package: TL061CJG is the 8-CDIP hermetic ceramic (through-hole), while TL061BCP is the 8-PDIP plastic. The CJG suffix indicates the ceramic package, which is RoHS non-compliant and intended for high-reliability or legacy designs. If your board accepts a plastic DIP and does not require hermetic sealing, the BCP is a direct functional equivalent."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL061CJG","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL061CJG when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}