{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL061CDR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL061CDR","canonicalUrl":"https://icboms.com/texas-instruments/TL061CDR","factsUrl":"https://icboms.com/api/mcp/products/TL061CDR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments TL061CDR, JFET-input operational amplifier, single circuit, 1 MHz gain-bandwidth product, 3.5 V/µs slew rate, 200 µA supply current, 8-SOIC package, 0°C to 70°C operating temperature.","salesMarkdown":"## JFET op-amp for low-power signal conditioning The TL061CDR is a single JFET-input operational amplifier from Texas Instruments, delivering a gain-bandwidth product of 1 MHz with a 3.5 V/µs slew rate. Its 200 µA supply current and 30 pA input bias current suit it for battery-powered preamplifiers, active filters, and ADC driver stages where power budget is tight and high input impedance is required. The 8-SOIC package and surface-mount footprint fit standard PCB layouts for commercial-grade (0°C to 70°C) equipment such as audio mixers, test instruments, and sensor interfaces. The 1 MHz gain-bandwidth product sets the small-signal bandwidth: expect unity-gain flatness to about 1 MHz, with usable gain of 10 up to roughly 100 kHz. The 3.5 V/µs slew rate limits large-signal output swing at higher frequencies — for a 10 V peak-to-peak output, the full-power bandwidth is about 55 kHz. That is adequate for audio-band processing and low-speed ADC drive, but not for video or high-speed data acquisition. If your application needs faster settling, a higher-slew-rate JFET op-amp like the TLV9351 (20 V/µs) is a different tier. ## Supply range and input offset — practical limits The TL061CDR operates from a single or split supply spanning 7 V to 36 V total. The 3 mV typical input offset voltage is moderate — acceptable for DC-coupled audio or level shifting, but not for precision strain-gauge or thermocouple front ends without auto-zero or calibration. The 30 pA input bias current, typical for JFET inputs, preserves signal integrity when driving from high-impedance sources like photodiodes or piezoelectric sensors. ## Package and footprint: 8-SOIC The supplier device package is 8-SOIC. No exposed pad — thermal dissipation relies on the SOIC body and PCB copper. ## Lifecycle and compliance It is ROHS3 compliant. For long-term BOM planning, the active status means it remains a qualified line item for new and sustaining production.","metaTitle":"TL061CDR JFET Op-Amp, 1 MHz GBW, 3.5 V/µs Slew Rate","metaDescription":"Texas Instruments TL061CDR JFET-input op-amp in 8-SOIC. 1 MHz GBW, 3.5 V/µs slew rate, 200 µA supply, 30 pA bias current.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"3.5V/µs","Mounting Type":"Surface Mount","Amplifier Type":"J-FET","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"200µA","Number of Circuits":"1","Current - Input Bias":"30 pA","Operating Temperature":"0°C ~ 70°C","Gain Bandwidth Product":"1 MHz","Voltage - Input Offset":"3 mV","Supplier Device Package":"8-SOIC","Voltage - Supply Span (Max)":"36 V","Voltage - Supply Span (Min)":"7 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.65","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.65000","currency":"USD"},{"qty":10,"price":"$0.56000","currency":"USD"},{"qty":25,"price":"$0.52320","currency":"USD"},{"qty":100,"price":"$0.41850","currency":"USD"},{"qty":250,"price":"$0.38860","currency":"USD"},{"qty":500,"price":"$0.32882","currency":"USD"},{"qty":1000,"price":"$0.25408","currency":"USD"},{"qty":2500,"price":"$0.23166","currency":"USD"},{"qty":5000,"price":"$0.21672","currency":"USD"},{"qty":12500,"price":"$0.21150","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/804ce7f08980d4ac40a8612da680baad.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the difference between TL061CDR and TL071?","answer":"The TL071 is a higher-performance JFET op-amp with a 3 MHz gain-bandwidth product and 13 V/µs slew rate versus the TL061's 1 MHz and 3.5 V/µs. The TL061 draws lower supply current (200 µA versus typically 1.4 mA for the TL071), making it the power-conscious choice for battery-operated designs where the TL071's extra speed is not needed."},{"question":"Can TL061CDR replace TL061?","answer":"The TL061CDR is the surface-mount (8-SOIC) variant of the TL061 JFET op-amp. If the original TL061 was a through-hole DIP package, the CDR suffix indicates the SOIC footprint — the electrical specifications (1 MHz GBW, 3.5 V/µs slew rate, 200 µA supply) are the same. Verify the PCB footprint compatibility before substituting."},{"question":"What is TL061CDR's listed slew rate?","answer":"The TL061CDR has a slew rate of 3.5 V/µs."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL061CDR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL061CDR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}