{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL052CP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL052CP","canonicalUrl":"https://icboms.com/texas-instruments/TL052CP","factsUrl":"https://icboms.com/api/mcp/products/TL052CP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LinCMOS™ TL052CP dual J-FET operational amplifier, 3 MHz gain bandwidth, 20.7 V/µs slew rate, 30 pA input bias current, 8-DIP through-hole package, tube.","salesMarkdown":"## What the 8-DIP package means for your reflow profile The TL052CP ships in an 8-DIP (0.300\", 7.62mm) through-hole package — no reflow profile to worry about, but the wave-solder dwell time and preheat ramp matter. The 8-PDIP body has a 2.54 mm lead pitch, so it sits cleanly in a standard 0.100-inch socket or solders into plated through-holes without tombstoning risk. Moisture sensitivity is not a concern for DIP packages — no bake required before wave soldering, unlike MSL-rated surface-mount parts that popcorn in the oven. The tube packaging keeps leads co-planar and protected from handling damage during kitting. ## JFET input stage: what 30 pA bias buys you on the bench The J-FET input stage draws only 30 pA of input bias current typical — this keeps the voltage error across a 10 kΩ source resistor under 0.3 µV, negligible for precision analog front-ends. Gain-bandwidth product is 3 MHz with a 20.7 V/µs slew rate — the combination sets the large-signal bandwidth ceiling. For a 10 V peak-to-peak output swing, the full-power bandwidth is about 330 kHz (slew rate / (π × Vpp)). Below that, the 3 MHz GBW governs small-signal gain flatness. Each of the two channels draws 4.8 mA supply current, totaling 9.6 mA for the dual package at 30 V maximum supply. The 80 mA per-channel output current drives 600 Ω loads to within a couple volts of the rails — not rail-to-rail, but adequate for driving ADC inputs or moderate cable capacitance. ## Active production — no last-time-buy clock ticking That wide compliance range simplifies power supply design — no need for a dedicated low-noise rail if the system already has ±12 V or ±15 V.","metaTitle":"Texas Instruments TL052CP JFET Op-Amp, 3 MHz, 8-DIP","metaDescription":"Texas Instruments TL052CP dual JFET op-amp in 8-DIP package. 3 MHz GBW, 20.7 V/µs slew rate, 30 pA bias current. Active production, RoHS3 compliant.","metaKeywords":null},"attributes":{"series":"LinCMOS™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Memory (DRAM / SRAM / Flash / EEPROM)"],"specifications":{"Series":"LinCMOS™","Package":"Tube","Slew Rate":"20.7V/µs","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"4.8mA (x2 Channels)","Number of Circuits":"2","Current - Input Bias":"30 pA","Operating Temperature":"0°C ~ 70°C (TA)","Gain Bandwidth Product":"3 MHz","Voltage - Input Offset":"650 µV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"80 mA","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.42","priceTiers":[{"qty":1,"price":"$1.42000","currency":"USD"},{"qty":10,"price":"$1.24100","currency":"USD"},{"qty":25,"price":"$1.16520","currency":"USD"},{"qty":100,"price":"$0.95090","currency":"USD"},{"qty":250,"price":"$0.88320","currency":"USD"},{"qty":500,"price":"$0.75166","currency":"USD"},{"qty":1000,"price":"$0.60132","currency":"USD"},{"qty":2500,"price":"$0.54495","currency":"USD"},{"qty":5000,"price":"$0.53183","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/37a18fafe0589af84220551035b6da4b.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/TL052CP/alternatives.json"},"ai":{"faq":[{"question":"What compliance documentation does Texas Instruments provide for TL052CP?","answer":"The TL052CP is RoHS3 compliant. Texas Instruments provides a datasheet with electrical characteristics, package outline drawing, and soldering recommendations for the 8-PDIP through-hole package."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL052CP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL052CP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}