{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TL051IP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"TL051IP","canonicalUrl":"https://icboms.com/texas-instruments/TL051IP","factsUrl":"https://icboms.com/api/mcp/products/TL051IP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments LinCMOS™ TL051IP, JFET-input operational amplifier, single circuit, 3.1 MHz gain bandwidth, 20 V/µs slew rate, 10 V to 30 V supply, 8-DIP through-hole package, industrial temperature range.","salesMarkdown":"The supply span runs from 10 V to 30 V, so it works on ±5 V to ±15 V split rails or a single 12 V to 24 V industrial rail — but not on 5 V or 3.3 V single-supply systems. A 20 V/µs slew rate means the TL051IP can swing a 10 V peak-to-peak output in about 500 ns, which is fast enough for 100 kHz-plus sine waves without slew-induced distortion. The 80 mA output current per channel lets it drive moderate loads like a 100 Ω line or a small relay coil directly, though the 8-DIP package's thermal limits should be checked if sinking continuous current near that ceiling. The 590 µV input offset is typical for a JFET stage at this price tier — acceptable for general-purpose signal paths but not for microvolt-level precision without auto-zero. Note the RoHS non-compliant marking — this through-hole DIP variant contains lead in the solder finish, which exempts it from RoHS restrictions for most industrial and aerospace applications but may require a waiver for new designs targeting full RoHS compliance.","metaTitle":"Texas Instruments TL051IP JFET Op-Amp, 3.1 MHz, 20 V/µs","metaDescription":"Texas Instruments TL051IP LinCMOS JFET op-amp: 3.1 MHz GBW, 20 V/µs slew rate, 30 pA bias, 10-30 V supply, -40 to 85°C. Active, RoHS non-compliant.","metaKeywords":null},"attributes":{"series":"LinCMOS™","packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Logic ICs"],"specifications":{"Series":"LinCMOS™","Package":"Bulk","Slew Rate":"20V/µs","Mounting Type":"Through Hole","Amplifier Type":"J-FET","Package / Case":"8-DIP (0.300\\\", 7.62mm)","lifecycle_stage":"eol_hot","Current - Supply":"2.7mA","Number of Circuits":"1","Current - Input Bias":"30 pA","Operating Temperature":"-40°C ~ 85°C (TA)","Gain Bandwidth Product":"3.1 MHz","Voltage - Input Offset":"590 µV","Supplier Device Package":"8-PDIP","Current - Output / Channel":"80 mA","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.93","stockQuantity":0,"priceTiers":[{"qty":325,"price":"$0.93000","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/fc1ad613b8fa9c84c9ffd511f4ac0d4d.pdf","sourceUrl":null},"ai":{"faq":[{"question":"How does TL051IP compare to the TL071?","answer":"The TL071 is a classic JFET op-amp with a 3 MHz GBW and 13 V/µs slew rate, close to the TL051IP's 3.1 MHz and 20 V/µs. The TL051IP offers a slightly faster slew rate and lower input bias current (30 pA vs 65 pA typical for the TL071), but the TL071 is available in a wider range of package and temperature options. Both are pin-compatible in the 8-DIP footprint, so the TL051IP can serve as a drop-in upgrade where faster settling or lower bias is needed."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/TL051IP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/TL051IP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}