{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"THS3095DDAR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"THS3095DDAR","canonicalUrl":"https://icboms.com/texas-instruments/THS3095DDAR","factsUrl":"https://icboms.com/api/mcp/products/THS3095DDAR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments THS3095DDAR, single current-feedback op-amp, 7300 V/µs slew rate, 235 MHz -3 dB bandwidth, 10 V to 30 V supply, 280 mA output, -40°C to 85°C, 8-PowerSOIC with exposed thermal pad.","salesMarkdown":"## 7300 V/µs current-feedback amplifier for high-speed pulse and line-drive Supply range from 10 V to 30 V gives flexibility for ±5 V to ±15 V rails, common in test equipment and industrial signal conditioning that needs to swing ±10 V into a load. Slew rate is the limiting factor for large-signal bandwidth in any amplifier. At 7300 V/µs, this part can swing a 20 V peak-to-peak output at roughly 58 MHz before the slew rate starts distorting the sine wave — well above what most video or pulse applications need. For comparison, a typical 100 MHz voltage-feedback op-amp with a 200 V/µs slew rate would start slewing on that same 20 V swing below 3 MHz. The THS3095DDAR keeps the output clean across the full 235 MHz -3 dB small-signal bandwidth. Because this is a current-feedback architecture, the -3 dB bandwidth stays relatively flat across gain settings — you do not lose bandwidth the way a voltage-feedback amp does when you close the loop for higher gain. That makes it predictable in variable-gain stages. ## PowerSOIC-8 with thermal pad — the package is part of the spec Without that thermal path, the 280 mA output current at high slew rates will push the junction temperature past the 85°C operating limit in still air. The pad is the primary heat path — the plastic leads alone cannot handle the dissipation. The package footprint matches the standard SOIC-8 land pattern with an extra thermal-land area under the body. Layout guides from TI recommend a 4-via array in the pad area to stitch the top copper to an inner ground plane.","metaTitle":"THS3095DDAR Current-Feedback Op-Amp, 7300 V/µs Slew Rate","metaDescription":"Texas Instruments THS3095DDAR single current-feedback op-amp. 7300 V/µs slew rate, 235 MHz -3 dB bandwidth, 280 mA output. Active, ROHS3.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Package":"Tape & Reel (TR); Cut Tape (CT)","Slew Rate":"7300V/µs","Mounting Type":"Surface Mount","-3db Bandwidth":"235 MHz","Amplifier Type":"Current Feedback","Package / Case":"8-PowerSOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Current - Supply":"9.5mA","Number of Circuits":"1","Current - Input Bias":"4 µA","Operating Temperature":"-40°C ~ 85°C","Voltage - Input Offset":"900 µV","Supplier Device Package":"8-SO PowerPad","Current - Output / Channel":"280 mA","Voltage - Supply Span (Max)":"30 V","Voltage - Supply Span (Min)":"10 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$11.53","priceTiers":[{"qty":1,"price":"$11.53000","currency":"USD"},{"qty":10,"price":"$10.42000","currency":"USD"},{"qty":25,"price":"$9.93480","currency":"USD"},{"qty":100,"price":"$8.62640","currency":"USD"},{"qty":250,"price":"$8.23876","currency":"USD"},{"qty":500,"price":"$7.51180","currency":"USD"},{"qty":1000,"price":"$6.85800","currency":"USD"},{"qty":2500,"price":"$6.85800","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/2bffd943f3e728ffe1acd8b43ef15597.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/THS3095DDAR/alternatives.json"},"ai":{"faq":[{"question":"What is the slew rate of THS3095DDAR?","answer":"The slew rate is 7300 V/µs, which is the defining speed parameter for this current-feedback amplifier and dictates its large-signal bandwidth capability."},{"question":"What is the equivalent or alternative to THS3095DDAR?","answer":"The THS4215DRBT is a voltage-feedback alternative with a 350 MHz bandwidth and 970 V/µs slew rate, but it is a different topology and lower output current (not specified in the same range). For a current-feedback replacement with similar output drive, check the TI THS3091/3092 family in the same package."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/THS3095DDAR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/THS3095DDAR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}