{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"STGP3HF60HD","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"STGP3HF60HD","canonicalUrl":"https://icboms.com/stmicroelectronics/STGP3HF60HD","factsUrl":"https://icboms.com/api/mcp/products/STGP3HF60HD","rawCanonicalId":null},"summary":{"shortDescription":"STMicroelectronics STGP3HF60HD IGBT, 600 V Vces, 7.5 A Ic, 12 nC gate charge, 38 W max power, TO-220-3 through-hole package, -55 to 150 °C junction temperature.","salesMarkdown":"## 600 V, 7.5 A IGBT — switching loss and drive budget The STGP3HF60HD is a 600 V, 7.5 A IGBT from STMicroelectronics in a TO-220-3 through-hole package. It targets hard-switched applications such as motor drives, power-factor correction stages, and induction heating where the collector current stays under the 7.5 A continuous ceiling and the 18 A pulsed rating covers inrush or transient loads. Gate charge is 12 nC — a modest drive requirement that a standard gate-driver IC or a discrete totem-pole can handle without excessive switching loss in the driver itself. The test condition of 400 V, 1.5 A, 100 Ω gate resistor, 15 V gate drive is representative of a typical 400 V DC-bus application. Switching energy is 19 µJ turn-on and 12 µJ turn-off at 400 V, 1.5 A, 100 Ω gate resistor. At a 20 kHz switching frequency the total switching loss per device is roughly 0.62 W — well within the 38 W max power rating, leaving thermal headroom for conduction loss. The 11 ns turn-on delay and 60 ns turn-off delay at 25 °C are fast enough for most hard-switched topologies; the turn-off delay is the dominant term and sets the minimum dead-time budget in a half-bridge leg. Reverse recovery time of the internal diode is 85 ns. In a bridge configuration the diode's trr contributes to the turn-on loss of the complementary IGBT; 85 ns is typical for a fast-recovery diode in this voltage class and keeps the cross-conduction interval short. ## Thermal and mounting — TO-220 in a real assembly In a motor-drive enclosure with ambient at 70°C and a 1.5 A load, the junction-to-case thermal path through the TO-220 tab to a heatsink determines whether the die stays below 150°C. The 38 W max power rating is the absolute ceiling; practical dissipation is lower once the heatsink thermal resistance is factored in. Through-hole mounting in a TO-220-3 package means the device is hand-solderable and reworkable, but the tab is the primary heat path — a heatsink with thermal compound or a pad is expected for any continuous current above a few hundred milliamps. The package is ROHS3 compliant, so no lead-free reflow concerns for the solder joint. That simplifies BOM continuity for designs already qualified with this part. For dual-sourcing planning, a parametric search on 600 V, 7.5 A IGBTs in TO-220 with similar gate charge and switching energy is the practical route — but no drop-in replacement is confirmed.","metaTitle":"STGP3HF60HD IGBT, 600 V 7.5 A, TO-220, 12 nC gate charge","metaDescription":"STMicroelectronics STGP3HF60HD IGBT, 600 V collector-emitter breakdown, 7.5 A continuous collector, 12 nC gate charge, TO-220-3 package, -55 to 150 °C junction.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":[],"specifications":{"Package":"Tube","Input Type":"Standard","Gate Charge":"12 nC","Power - Max":"38 W","Mounting Type":"Through Hole","Package / Case":"TO-220-3","Test Condition":"400V, 1.5A, 100Ohm, 15V","lifecycle_stage":"eol_hot","Switching Energy":"19µJ (on), 12µJ (off)","Td (on/off) @ 25°C":"11ns/60ns","Operating Temperature":"-55°C ~ 150°C (TJ)","Supplier Device Package":"TO-220","Vce(on) (Max) @ Vge, Ic":"2.95V @ 15V, 1.5A","Reverse Recovery Time (trr)":"85 ns","Current - Collector (Ic) (Max)":"7.5 A","Current - Collector Pulsed (Icm)":"18 A","Voltage - Collector Emitter Breakdown (Max)":"600 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.17","priceTiers":[{"qty":1,"price":"$1.17000","currency":"USD"},{"qty":10,"price":"$1.04900","currency":"USD"},{"qty":100,"price":"$0.81770","currency":"USD"},{"qty":500,"price":"$0.67550","currency":"USD"},{"qty":1000,"price":"$0.58695","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/94b87cb1dfd180e75348c7335d236e76.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/STGP3HF60HD/alternatives.json"},"ai":{"faq":[{"question":"What is the STGP3HF60HD used for?","answer":"The STGP3HF60HD is a 600 V, 7.5 A IGBT in a TO-220 package, used in hard-switched applications such as motor drives, power-factor correction stages, and induction heating where the collector current stays under the 7.5 A continuous ceiling."},{"question":"Is the STGP3HF60HD RoHS compliant?","answer":"Yes, the STGP3HF60HD is ROHS3 compliant, so no lead-free reflow concerns for the solder joint."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/STGP3HF60HD","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/STGP3HF60HD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-20T14:34:45.345Z","lastPublished":"2026-07-20T14:34:45.345Z","indexable":true}}