{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"STGF10NB60SD","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"STGF10NB60SD","canonicalUrl":"https://icboms.com/stmicroelectronics/STGF10NB60SD","factsUrl":"https://icboms.com/api/mcp/products/STGF10NB60SD","rawCanonicalId":null},"summary":{"shortDescription":"STMicroelectronics PowerMESH™ IGBT, STGF10NB60SD, 600 V collector-emitter breakdown, 23 A continuous collector, 25 W max, TO-220-3 Full Pack through-hole, -55°C to 150°C junction.","salesMarkdown":"## 600 V, 23 A — where this IGBT sits in the kit The STGF10NB60SD is an STMicroelectronics PowerMESH™ IGBT rated for 600 V collector-emitter breakdown and 23 A continuous collector current, in a TO-220FP full-pack through-hole package. It is a standard-input N-channel device built for hard-switched power stages — motor drives, UPS inverters, PFC boost stages — where the 600 V blocking voltage gives margin on a 400 V DC bus. ## Switching losses — the off-energy is the number to watch Under the test condition of 480 V, 10 A, 1 kOhm gate resistor, and 15 V gate drive, the turn-on switching energy is 600 µJ and the turn-off energy is 5 mJ. The off-energy dominates by nearly an order of magnitude, which means this part runs hottest during the turn-off edge — a snubber or a slower gate-drive turn-off can shift some of that loss, but the thermal design should budget for the 5 mJ per pulse at the target switching frequency. Turn-on delay is 700 ns, turn-off delay is 1.2 µs at 25 °C junction. ## On-state voltage and gate drive Vce(on) is 1.75 V maximum at 15 V gate drive and 10 A collector current — a typical conduction loss for a 600 V trench IGBT in this current class. The total gate charge is 33 nC, so a standard MCU GPIO through a 1 kOhm resistor will switch it, but the 700 ns/1.2 µs delays mean the gate driver should source at least 0.5 A peak to keep the switching edges clean. ## Package — TO-220FP full-pack, no heatsink isolation worries The TO-220FP full-pack moulding isolates the tab electrically — no insulating pad or washer needed when bolting to a grounded heatsink. The through-hole mounting is field-serviceable with a standard soldering iron; the three leads are spaced at 2.54 mm pitch, easy to probe and replace on site.","metaTitle":"STGF10NB60SD IGBT, 600 V 23 A, TO-220FP, PowerMESH™","metaDescription":"STMicroelectronics STGF10NB60SD IGBT, 600 V collector-emitter, 23 A continuous, 25 W max, TO-220FP full-pack, active production.","metaKeywords":null},"attributes":{"series":"PowerMESH™","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":[],"specifications":{"Series":"PowerMESH™","Package":"Tube","Input Type":"Standard","Gate Charge":"33 nC","Power - Max":"25 W","Mounting Type":"Through Hole","Package / Case":"TO-220-3 Full Pack","Test Condition":"480V, 10A, 1kOhm, 15V","lifecycle_stage":"eol_hot","Switching Energy":"600µJ (on), 5mJ (off)","Td (on/off) @ 25°C":"700ns/1.2µs","Operating Temperature":"-55°C ~ 150°C (TJ)","Supplier Device Package":"TO-220FP","Vce(on) (Max) @ Vge, Ic":"1.75V @ 15V, 10A","Reverse Recovery Time (trr)":"37 ns","Current - Collector (Ic) (Max)":"23 A","Current - Collector Pulsed (Icm)":"80 A","Voltage - Collector Emitter Breakdown (Max)":"600 V"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$2.26","priceTiers":[{"qty":1,"price":"$2.26000","currency":"USD"},{"qty":10,"price":"$1.88000","currency":"USD"},{"qty":100,"price":"$1.49620","currency":"USD"},{"qty":500,"price":"$1.26604","currency":"USD"},{"qty":1000,"price":"$1.07422","currency":"USD"},{"qty":2000,"price":"$1.02051","currency":"USD"},{"qty":5000,"price":"$0.98214","currency":"USD"},{"qty":10000,"price":"$0.94963","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/58c86a9df0d86699371c8f2ca311f904.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/STGF10NB60SD/alternatives.json"},"ai":{"faq":[{"question":"Does the STGF10NB60SD fit a TO-220FP footprint?","answer":"Yes. The supplier device package is TO-220FP, which is the full-pack variant of the standard TO-220 outline. The three leads are on 2.54 mm pitch and the mounting hole pattern is identical to a standard TO-220."},{"question":"What is the difference between STGF10NB60SD and STGF10NB60S?","answer":"The evidence does not carry a direct comparison entry for the STGF10NB60S variant. For a pin-compatible alternative within the same PowerMESH™ family, confirm the specific suffix differences against the STMicroelectronics datasheet — the 'D' suffix typically denotes a different diode or switching speed grade, but this is not confirmed in the on-record data."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/STGF10NB60SD","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/STGF10NB60SD when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-20T14:34:45.345Z","lastPublished":"2026-07-20T14:34:45.345Z","indexable":true}}