{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"STFU10NK60Z","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"STFU10NK60Z","canonicalUrl":"https://icboms.com/stmicroelectronics/STFU10NK60Z","factsUrl":"https://icboms.com/api/mcp/products/STFU10NK60Z","rawCanonicalId":null},"summary":{"shortDescription":"STMicroelectronics SuperMESH™ STFU10NK60Z, N-Channel MOSFET, 600V Vdss, 10A Id, 750mOhm Rds(on), TO-220-3 Full Pack, -55°C to 150°C.","salesMarkdown":"## 600 V N-channel in a fully isolated TO-220FP ## Conduction loss and gate drive budget That 750 mOhm is the number to plug into your conduction loss calculation at the nominal operating point — expect it to rise with junction temperature per the normalized curve in the datasheet. Gate charge totals 48 nC at 10 V, so at a 100 kHz switching frequency the gate drive must source roughly 4.8 mA average current; a standard MOSFET driver with a 1 A peak output handles this comfortably. ## Input capacitance and switching speed Input capacitance (Ciss) is 1370 pF typical at 25 V drain-source. That's a moderate figure — it keeps the gate drive energy per cycle manageable while still allowing reasonable switching speeds in a hard-switched topology. The 4.5 V gate threshold at 250 µA drain current sets the turn-on voltage floor; for full enhancement you drive with 10 V as specified. The RoHS compliance status is listed as non-compliant — verify your assembly's exemption policy if you are operating under a full RoHS directive. ## Where it lands in the SuperMESH family The STFU10NK60Z is a 600 V, 10 A member of ST's SuperMESH™ line. A common cross-shop is the STF10NK60Z — the difference is the package suffix: the STFU variant uses the fully isolated TO-220FP, while the STF variant uses the standard TO-220 with a conductive tab. If your heatsink requires an isolated mounting interface, the STFU10NK60Z saves the cost of an insulating kit.","metaTitle":"STFU10NK60Z MOSFET, N-Ch 600V 10A, TO-220FP, SuperMESH","metaDescription":"STMicroelectronics STFU10NK60Z N-channel MOSFET, 600V Vdss, 10A Id, 750mOhm Rds(on), TO-220-3 Full Pack, -55 to 150°C. Active production.","metaKeywords":null},"attributes":{"series":"SuperMESH™","packageCase":null,"mountingType":null,"rohsStatus":"RoHS non-compliant","productStatus":"Active","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"STMicroelectronics","Series":"SuperMESH™","Package":"Tube","FET Type":"N-Channel","Vgs (Max)":"±30V","Technology":"MOSFET (Metal Oxide)","FET Feature":"-","Mounting Type":"Through Hole","Package / Case":"TO-220-3 Full Pack","Product Status":"Active","lifecycle_stage":"eol_hot","Vgs(th) (Max) @ Id":"4.5V @ 250µA","Base Product Number":"STFU10","Operating Temperature":"-55°C ~ 150°C (TJ)","Rds On (Max) @ Id, Vgs":"750mOhm @ 4.5A, 10V","Power Dissipation (Max)":"35W (Tc)","Supplier Device Package":"TO-220FP","Gate Charge (Qg) (Max) @ Vgs":"48 nC @ 10 V","Drain to Source Voltage (Vdss)":"600 V","Input Capacitance (Ciss) (Max) @ Vds":"1370 pF @ 25 V","Drive Voltage (Max Rds On, Min Rds On)":"10V","Current - Continuous Drain (Id) @ 25°C":"10A (Tc)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$1.6000","priceTiers":[{"qty":1,"price":"$1.60000","currency":"USD"},{"qty":10,"price":"$1.31000","currency":"USD"},{"qty":100,"price":"$1.01890","currency":"USD"},{"qty":500,"price":"$0.86366","currency":"USD"},{"qty":1000,"price":"$0.70355","currency":"USD"},{"qty":2000,"price":"$0.66231","currency":"USD"},{"qty":5000,"price":"$0.63077","currency":"USD"},{"qty":10000,"price":"$0.60165","currency":"USD"}]},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/STFU10NK60Z/alternatives.json"},"ai":{"faq":[{"question":"What is the maximum power dissipation of the STFU10NK60Z?","answer":"Maximum power dissipation is 35 W at the case temperature (Tc). This sets the thermal budget for heatsink selection."},{"question":"What is the difference between STFU10NK60Z and STF10NK60Z?","answer":"The STFU10NK60Z uses the TO-220-3 Full Pack (TO-220FP) package with a fully isolated tab. The STF10NK60Z uses a standard TO-220 package with a conductive tab. The STFU variant eliminates the need for an insulating pad or washer when mounting to a heatsink."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/STFU10NK60Z","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/STFU10NK60Z when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}