{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"STF22NM60ND","brand":"STMicroelectronics","brandSlug":"stmicroelectronics","productSlug":"STF22NM60ND","canonicalUrl":"https://icboms.com/stmicroelectronics/STF22NM60ND","factsUrl":"https://icboms.com/api/mcp/products/STF22NM60ND","rawCanonicalId":null},"summary":{"shortDescription":"STMicroelectronics STF22NM60ND, N-channel 600V 17A MOSFET, AEC-Q101 qualified, FDmesh II technology, 220 mOhm Rds(on) at 10V gate drive, TO-220FP full-pack through-hole package.","salesMarkdown":"## 600 V N-channel MOSFET with AEC-Q101 qualification This is an AEC-Q101 qualified device from the automotive-grade series, designed for high-voltage power conversion in vehicle systems — DC-DC converters, PFC stages, auxiliary supplies, and motor drive inverters where the 600 V drain-source voltage handles the bus rail. These switching figures suit moderate-frequency hard-switched topologies in the 50-150 kHz range where the designer balances conduction loss against switching loss. ## TO-220FP full-pack — no insulating washer needed The TO-220FP full-pack package (also called TO-220 isolated tab) is a deliberate choice for high-voltage automotive designs. This saves a BOM line, reduces assembly steps, and eliminates the thermal interface failure point that a mica washer introduces. Maximum power dissipation is 30 W at case temperature, derated to the junction temperature limit of 150°C. The through-hole mounting suits boards where the heatsink is on the opposite side of the PCB or where mechanical retention from the bolt-through tab is preferred over surface-mount clip attachment. Gate drive voltage is specified at 10 V for both maximum and minimum Rds(on), with an absolute maximum gate-source voltage of ±25 V. This means STMicroelectronics no longer manufactures this order code, and no last-time-buy window remains open. New-production requirements must be sourced through independent distribution channels — surplus inventory, broker stock, or franchise-distributor remaining shelf stock. For a buyer filling a BOM line in production, the obsolete status means this part cannot be specified into a new design unless the design team has already qualified it and the remaining lifecycle of the product can be covered by secured surplus inventory. Any new design-in should target a current-production replacement.","metaTitle":"STF22NM60ND N-Channel 600V MOSFET, AEC-Q101, TO-220FP","metaDescription":"STF22NM60ND N-channel 600V 17A MOSFET in TO-220FP full-pack. AEC-Q101 qualified, FDmesh II technology.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Discrete Semiconductors"],"specifications":{"Mfr":"STMicroelectronics","Series":"Automotive, AEC-Q101, FDmesh™ II","Package":"Tube","FET Type":"N-Channel","Vgs (Max)":"±25V","Technology":"MOSFET (Metal Oxide)","FET Feature":"-","Mounting Type":"Through Hole","Package / Case":"TO-220-3 Full Pack","Product Status":"Obsolete","lifecycle_stage":"eol_hot","Vgs(th) (Max) @ Id":"5V @ 250µA","Base Product Number":"STF22","Operating Temperature":"150°C(TJ)","Rds On (Max) @ Id, Vgs":"220mOhm @ 8.5A, 10V","Power Dissipation (Max)":"30W (Tc)","Supplier Device Package":"TO-220FP","Gate Charge (Qg) (Max) @ Vgs":"60 nC @ 10 V","Drain to Source Voltage (Vdss)":"600 V","Input Capacitance (Ciss) (Max) @ Vds":"1800 pF @ 50 V","Drive Voltage (Max Rds On, Min Rds On)":"10V","Current - Continuous Drain (Id) @ 25°C":"17A (Tc)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/STF22NM60ND/alternatives.json"},"ai":{"faq":[{"question":"What is the replacement for STF22NM60ND?","answer":"A functionally similar current-production part would need to be a 600 V N-channel AEC-Q101 MOSFET in a TO-220FP package, but the exact replacement depends on the application's switching frequency, gate drive voltage, and thermal budget. A design review with the manufacturer's application team or a qualified distributor is recommended to select a pin-compatible alternative from the current FDmesh II or MDmesh lineup."},{"question":"Can I replace STF22NM60ND with a non-automotive MOSFET?","answer":"Technically yes, if the application does not require AEC-Q101 qualification. A non-automotive 600 V N-channel MOSFET in TO-220FP with similar Rds(on) and gate charge could function in the same circuit. However, if the original design specified the STF22NM60ND for its automotive grade, replacing it with an industrial-grade part voids any AEC-Q101 compliance claim and may fail PPAP audit requirements for automotive production."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/stmicroelectronics/STF22NM60ND","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/stmicroelectronics/STF22NM60ND when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}