{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN75LVDS180D","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN75LVDS180D","canonicalUrl":"https://icboms.com/texas-instruments/SN75LVDS180D","factsUrl":"https://icboms.com/api/mcp/products/SN75LVDS180D","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN75LVDS180D LVDS transceiver, full duplex, 155 Mbps data rate, 3 V to 3.6 V supply, 0°C to 70°C, 14-SOIC package, tube.","salesMarkdown":"## LVDS transceiver for point-to-point links This part is designed for low-voltage differential signaling in short-reach, high-speed serial links — typical in telecom backplane, base station clock distribution, and industrial video transport where signal integrity over twisted-pair or PCB traces matters. ## 155 Mbps full-duplex — what it buys you Full-duplex operation means the driver and receiver are active simultaneously, so a single SN75LVDS180D handles bidirectional traffic on a dedicated pair — no direction-control pin, no turnaround dead time. The 155 Mbps data rate supports common LVDS applications like clock distribution at 100 MHz or serialized data at 16-bit parallel-to-serial conversion rates. At 3.3 V nominal, the differential output swing stays within LVDS levels (350 mV typical), keeping EMI low and common-mode rejection high. No direct pin-compatible replacement is cited in the official records, though the SN65LVDS180 family (industrial temperature grade) is a common cross-shop candidate for extended-range applications. Date-code and lot traceability are verified before shipment; any stock with inconsistent laser etching or packaging is rejected. Supply decoupling at 0.1 µF per pin pair is typical; the LVDS outputs require 100 Ω termination at the receiver for proper signal levels.","metaTitle":"SN75LVDS180D LVDS Transceiver, 155 Mbps, Full Duplex","metaDescription":"Texas Instruments SN75LVDS180D LVDS transceiver, 155 Mbps full-duplex, 3V-3.6V supply, 0°C-70°C, 14-SOIC.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Full","Series":"-","Package":"Tube","Protocol":"LVDS","Data Rate":"155Mbps","Mounting Type":"Surface Mount","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Obsolete","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Base Product Number":"SN75LV","Operating Temperature":"0°C~70°C","Supplier Device Package":"14-SOIC","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.8000","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/38ac72e9786bb398b578c411d3192829.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN75LVDS180D/alternatives.json"},"ai":{"faq":[{"question":"What is the exact replacement for SN75LVDS180D?","answer":"No exact pin-compatible replacement is listed in Texas Instruments' official records. The SN65LVDS180 family (industrial temperature, -40°C to 85°C) is a functional alternative but differs in temperature grade and may require BOM re-qualification. For a drop-in substitute, verify the pinout and electrical specs against your design."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN75LVDS180D","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN75LVDS180D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}