{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN74AHC1G125DBVT","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN74AHC1G125DBVT","canonicalUrl":"https://icboms.com/texas-instruments/SN74AHC1G125DBVT","factsUrl":"https://icboms.com/api/mcp/products/SN74AHC1G125DBVT","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments 74AHC series, SN74AHC1G125DBVT, Buffer Non-Inverting, 3-State, 1-Element, 1-Bit, 8mA output, 2V to 5.5V supply, SOT-23-5, -40°C to 125°C.","salesMarkdown":"## Single-gate buffer with 3-state output — 2V to 5.5V supply The Texas Instruments SN74AHC1G125DBVT is a single-gate, non-inverting buffer from the 74AHC series, with a 3-state output that lets you disconnect the output from the bus when the output-enable pin is driven high. It operates across a supply range of 2V to 5.5V, making it compatible with both 3.3V and 5V logic families without a level translator in many cases. The output can sink or source 8mA at the rated supply voltage, which is enough to drive a standard CMOS input, an LED indicator, or a low-power relay coil through a transistor. The part is housed in a SOT-23-5 package (also known as SC-74A), a five-pin surface-mount footprint that fits tight board layouts where you need just one buffer gate without wasting a quad-package. ## What the 8mA output drive means for your load The 8mA output high and low current is symmetric, so the buffer can both source and sink the same current. For a typical 3.3V CMOS input with a few pF of load, 8mA is plenty. If you are driving a longer trace or a bus with multiple receivers, the 3-state output lets you float the line when the buffer is disabled, avoiding contention on shared data lines. The drive strength is specified across the full 2V to 5.5V supply range, so at 2V the output current will be lower than at 5V — but the 8mA figure is the rated minimum at the rated supply, so you have guaranteed headroom for the load you connect. ## Temperature grade and deployment environment Rated for -40°C to 125°C ambient, this buffer covers industrial automation, outdoor telecom cabinets, engine-bay electronics, and any environment where the board sees temperature swings. The 125°C upper limit means it can sit next to a hot processor or power stage without derating. The 74AHC series uses CMOS technology, so quiescent current is low — microamps — which matters in battery-powered or always-on subsystems. ## Lifecycle and sourcing — active, no LTB risk The SN74AHC1G125DBVT carries an Active lifecycle status from Texas Instruments, with ROHS3 compliance.","metaTitle":"SN74AHC1G125DBVT 74AHC Buffer, 3-State, SOT-23-5, 2V-5.5V","metaDescription":"TI SN74AHC1G125DBVT single-gate non-inverting buffer with 3-state output. 2V to 5.5V supply, 8mA drive, -40°C to 125°C. Active, ROHS3.","metaKeywords":null},"attributes":{"series":"74AHC","packageCase":null,"mountingType":null,"rohsStatus":"ROHS3 Compliant","productStatus":"Active","categoryPath":["Analog & Data Acquisition"],"specifications":{"Series":"74AHC","Package":"Tape & Reel (TR); Cut Tape (CT)","Logic Type":"Buffer, Non-Inverting","Output Type":"3-State","Mounting Type":"Surface Mount","Package / Case":"SC-74A, SOT-753","lifecycle_stage":"eol_hot","Voltage - Supply":"2V ~ 5.5V","Number of Elements":"1","Operating Temperature":"-40°C ~ 125°C (TA)","Supplier Device Package":"SOT-23-5","Current - Output High, Low":"8mA, 8mA","Number of Bits per Element":"1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$0.94","stockQuantity":0,"priceTiers":[{"qty":1,"price":"$0.94000","currency":"USD"},{"qty":10,"price":"$0.84400","currency":"USD"},{"qty":25,"price":"$0.80120","currency":"USD"},{"qty":100,"price":"$0.65830","currency":"USD"},{"qty":250,"price":"$0.61532","currency":"USD"},{"qty":500,"price":"$0.54378","currency":"USD"},{"qty":1250,"price":"$0.42930","currency":"USD"},{"qty":2500,"price":"$0.40500","currency":"USD"}]},"links":{"datasheetUrl":"https://cdn.icboms.com/b51c1efe42b8af8a411d01ad16a968ec.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the output drive strength of SN74AHC1G125DBVT?","answer":"The output can sink or source 8mA at both high and low logic levels, rated across the full 2V to 5.5V supply range. This is enough for driving CMOS inputs, small LEDs, or the base of a switching transistor."},{"question":"Is SN74AHC1G125DBVT 3.3V compatible?","answer":"Yes, the 2V to 5.5V supply range includes 3.3V. At 3.3V the input thresholds are compatible with standard 3.3V CMOS and LVTTL logic, and the 8mA output drive is sufficient for typical 3.3V loads."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN74AHC1G125DBVT","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN74AHC1G125DBVT when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-17T19:50:00.618Z","lastPublished":"2026-07-17T19:50:00.618Z","indexable":true}}