{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65LVDS390PWRG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65LVDS390PWRG4","canonicalUrl":"https://icboms.com/texas-instruments/SN65LVDS390PWRG4","factsUrl":"https://icboms.com/api/mcp/products/SN65LVDS390PWRG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments 65LVDS series SN65LVDS390PWRG4 LVDS Receiver, 0/4 Drivers/Receivers, 200Mbps Data Rate, 3V ~ 3.6V Supply, -40°C ~ 85°C, Surface Mount 16-TSSOP.","salesMarkdown":"## Quad LVDS receiver — four channels, one direction It handles serial data rates up to 200 Mbps per channel, making it a fit for point-to-point backplane links, cable extensions, and clock distribution where the transmit side is handled by a separate LVDS driver. Each of the four receivers is rated for 200 Mbps, which translates to a 100 MHz clock-equivalent data rate. That is enough for most parallel-bus serialisation schemes (10-bit words at 20 MHz, 8b/10b encoded at 100 MHz line rate). The receiver input threshold follows the LVDS standard (100 mV differential swing typical), so the signal-integrity budget depends on the driver's output amplitude and the cable's attenuation at the operating frequency. At 200 Mbps over a 1-metre twisted-pair, expect clean eye opening with standard LVDS drive levels. ## 3.3 V rail only — no 5 V tolerance It is not 5 V-tolerant on the supply or the inputs. If the board has a 5 V-only backplane, a separate LVDS driver with 5 V-compatible inputs or a level translator is needed upstream. ## Industrial temperature — outdoor and enclosure use No derating is needed for the full range at 200 Mbps, as the LVDS common-mode range and threshold stability hold across the temperature span.","metaTitle":"TI SN65LVDS390PWRG4 LVDS Receiver, 200 Mbps, 16-TSSOP","metaDescription":"Texas Instruments SN65LVDS390PWRG4 quad LVDS receiver, 200 Mbps per channel, 3V-3.6V supply, -40°C to 85°C, 16-TSSOP. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Receiver","Duplex":"-","Series":"65LVDS","Package":"Tape & Reel (TR)","Protocol":"LVDS","Data Rate":"200Mbps","Mounting Type":"Surface Mount","Package / Case":"16-TSSOP (0.173\\\", 4.40mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Base Product Number":"65LVDS390","Operating Temperature":"-40°C~85°C","Supplier Device Package":"16-TSSOP","Number of Drivers/Receivers":"0/4"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/6d16c26c002cd3c123460b10d614934b.pdf","sourceUrl":null},"ai":{"faq":[{"question":"Is SN65LVDS390PWRG4 a direct replacement for SN65LVDS390DR?","answer":"The SN65LVDS390DR is the same die in a different package (SOIC-16 versus TSSOP-16). The PWRG4 suffix indicates the 16-TSSOP package on tape-and-reel. They are functionally identical but not footprint-compatible — the board layout must match the package."},{"question":"Is SN65LVDS390PWRG4 compatible with 3.3V?","answer":"Both the supply and the LVDS input common-mode range are specified for 3.3 V operation."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65LVDS390PWRG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65LVDS390PWRG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}