{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65LVDS390DRG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65LVDS390DRG4","canonicalUrl":"https://icboms.com/texas-instruments/SN65LVDS390DRG4","factsUrl":"https://icboms.com/api/mcp/products/SN65LVDS390DRG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments 65LVDS series, SN65LVDS390DRG4, LVDS Receiver, 0/4 Drivers/Receivers, 200 Mbps, 3V to 3.6V, -40°C to 85°C, 16-SOIC, Tape & Reel.","salesMarkdown":"## Quad LVDS receiver for 200 Mbps links The Texas Instruments SN65LVDS390DRG4 is a quad-channel LVDS receiver in the 65LVDS family, designed to convert differential LVDS signals to single-ended CMOS levels. Because it is a receiver-only device (0 drivers, 4 receivers), it is the right choice for unidirectional LVDS links where the transmit side is handled by a separate driver or transceiver. The 200 Mbps rating is the per-channel maximum — the part can sustain back-to-back data at that rate across all four channels simultaneously, provided the input differential swing stays within the LVDS standard. ## Supply rail and signal integrity At the nominal 3.3V rail, the receiver input common-mode range covers the LVDS standard of 0V to 2.4V, which is typical for point-to-point and multidrop backplane links. For signal integrity at 200 Mbps, keep the differential trace pairs length-matched and the supply decoupling within 5 mm of the VCC pin — a 0.1 µF ceramic plus a 1 µF bulk cap per the reference design is sufficient. For production planning, this removes the risk of a sudden discontinuation that would force a board respin. The G4 designation is a TI-specific environmental code (lead-free / RoHS-compliant) and does not affect electrical compatibility with the base SN65LVDS390DR variant.","metaTitle":"SN65LVDS390DRG4 LVDS Receiver, 200 Mbps, 16-SOIC","metaDescription":"Texas Instruments SN65LVDS390DRG4 is a quad LVDS receiver with 200 Mbps data rate, 3V to 3.6V supply, -40°C to 85°C range. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Receiver","Duplex":"-","Series":"65LVDS","Package":"Tape & Reel (TR)","Protocol":"LVDS","Data Rate":"200Mbps","Mounting Type":"Surface Mount","Package / Case":"16-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Base Product Number":"65LVDS390","Operating Temperature":"-40°C ~ 85°C","Supplier Device Package":"16-SOIC","Number of Drivers/Receivers":"0/4"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.5900","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/6d16c26c002cd3c123460b10d614934b.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65LVDS390DRG4/alternatives.json"},"ai":{"faq":[{"question":"Is SN65LVDS390DRG4 a direct replacement for SN65LVDS390DR?","answer":"The SN65LVDS390DRG4 is electrically identical to the SN65LVDS390DR — same quad LVDS receiver, same 200 Mbps data rate, same 3V to 3.6V supply, same 16-SOIC package. The only difference is the G4 suffix, which indicates TI's lead-free / RoHS-compliant finishing. It is a drop-in replacement for the DR variant in any board that accepts lead-free solder."},{"question":"Does SN65LVDS390DRG4 support 200 Mbps data rate?","answer":"Yes, the SN65LVDS390DRG4 is rated for a data rate of 200 Mbps per channel. This is the maximum specified rate, and the part is designed to sustain it across all four receiver channels simultaneously under the LVDS signal-level standard."},{"question":"Is SN65LVDS390DRG4 compatible with 3.3V supply?","answer":"The part will operate correctly with a 3.3V supply, including the typical ±5% tolerance."},{"question":"What is SN65LVDS390DRG4's listed type on this component line?","answer":"The listed type is Receiver. It is a quad-channel LVDS receiver with 0 drivers and 4 receivers, intended for unidirectional differential-to-single-ended conversion."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65LVDS390DRG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65LVDS390DRG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}