{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65LVDS100DR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65LVDS100DR","canonicalUrl":"https://icboms.com/texas-instruments/SN65LVDS100DR","factsUrl":"https://icboms.com/api/mcp/products/SN65LVDS100DR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65LVDS100DR, Buffer/ReDriver, 1 channel, 2 Gbps max data rate, 470 ps delay, Input CML/LVDS/LVPECL, Output LVDS, 3 V–3.6 V supply, -40°C to 85°C, 8-SOIC package.","salesMarkdown":"## What this buffer does on a high-speed serial link It is built for board-level signal conditioning where a fast edge needs to travel across a backplane or a long trace without degrading the eye. The 2 Gbps max data rate covers common serial protocols like Gigabit Ethernet, SATA, and LVDS video links, and the 470 ps propagation delay is low enough that you can budget it into a multi-drop clock distribution without losing margin. At 2 Gbps the bit period is 500 ps, so the 470 ps delay eats nearly one full bit time. That matters if you are daisy-chaining several buffers in a clock tree — the cumulative delay can shift phase alignment. For a single re-driver in a point-to-point link, the 470 ps is fine; the part is meant to restore signal amplitude and edge rate, not to add zero delay. The 0.6 pF input capacitance is light enough that it does not load the driving source appreciably at these speeds, so you can place it close to the connector without pulling down the upstream driver. ## Multi-protocol input — one part for mixed-signal backplanes The SN65LVDS100DR accepts CML, LVDS, and LVPECL on the input side and always outputs LVDS. That makes it a handy level translator when you are mixing logic families on the same board — say a CML serializer feeding an LVDS backplane, or an LVPECL oscillator driving multiple LVDS fan-out buffers. The 25 mA supply current is modest for a 2 Gbps repeater; it will not stress a 3.3 V regulator rated for a few hundred milliamps. ## Package and footprint — 8-SOIC, surface-mount No need to worry about finding a substitute or stocking up before an EOL cutoff.","metaTitle":"TI SN65LVDS100DR Buffer/ReDriver, 2 Gbps, LVDS, 8-SOIC","metaDescription":"Texas Instruments SN65LVDS100DR buffer/repeater: 2 Gbps max data rate, 470 ps delay, accepts CML/LVDS/LVPECL inputs, outputs LVDS. Industrial temp -40°C to","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Buffer, ReDriver","Input":"CML, LVDS, LVPECL","Output":"LVDS","Series":"-","Package":"Tape & Reel (TR)","Delay Time":"470ps","Applications":"-","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","Data Rate (Max)":"2Gbps","lifecycle_stage":"eol_hot","Current - Supply":"25mA","Voltage - Supply":"3V ~ 3.6V","Number of Channels":"1","Base Product Number":"65LVDS100","Capacitance - Input":"0.6 pF","Signal Conditioning":"-","Operating Temperature":"-40°C~85°C","Supplier Device Package":"8-SOIC"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$3.0090","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/504e0dff2bc3612f9257686fcd8fe425.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65LVDS100DR/alternatives.json"},"ai":{"faq":[{"question":"What is the maximum data rate of SN65LVDS100DR?","answer":"The maximum data rate is 2 Gbps. That covers common high-speed serial protocols such as Gigabit Ethernet, SATA, and LVDS video links."},{"question":"Can SN65LVDS100DR replace SN65LVDS100D?","answer":"The SN65LVDS100DR is the Tape & Reel variant of the base SN65LVDS100D. Electrically they are identical — same buffer/repeater function, same 2 Gbps data rate, same 470 ps delay, same input/output protocols. The only difference is the shipping medium: the DR suffix indicates Tape & Reel for automated assembly, while the D suffix typically comes in tubes. If your board is designed for the 8-SOIC footprint, the DR variant is a drop-in replacement."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65LVDS100DR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65LVDS100DR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}