{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD75DGK","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD75DGK","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD75DGK","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD75DGK","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD75DGK, RS422/RS485 transceiver, half-duplex, 20 Mbps data rate, 3V to 3.6V supply, -40°C to 125°C, 8-VSSOP package.","salesMarkdown":"It handles one driver and one receiver on a single differential bus, with data rates up to 20 Mbps. The 80 mV of receiver hysteresis gives it solid noise margin on long cable runs or in electrically noisy factory-floor environments. At 20 Mbps the SN65HVD75DGK can clock a full-speed PROFIBUS segment or a high-throughput sensor network. Half-duplex means the driver and receiver share the same pair of wires, so the firmware must manage direction control — typically by toggling the driver enable pin around each transmission. This is standard for RS-485 multidrop buses; the trade-off is one less twisted pair versus a full-duplex part, which saves cable cost and connector pins.","metaTitle":"SN65HVD75DGK RS485 Transceiver, 20 Mbps, Half-Duplex","metaDescription":"TI SN65HVD75DGK half-duplex RS422/RS485 transceiver, 20 Mbps data rate, 3V to 3.6V supply, -40°C to 125°C, 8-VSSOP. Available to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Half","Series":"-","Package":"Tube","Protocol":"RS422, RS485","Data Rate":"20Mbps","Mounting Type":"Surface Mount","Package / Case":"8-TSSOP, 8-MSOP (0.118\\\", 3.00mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Base Product Number":"65HVD75","Receiver Hysteresis":"80 mV","Operating Temperature":"-40°C~125°C","Supplier Device Package":"8-VSSOP","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.4900","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/2aa3adfbd81091d326c58b9e89c27776.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD75DGK/alternatives.json"},"ai":{"faq":[{"question":"Is SN65HVD75DGK full duplex?","answer":"No, it is a half-duplex transceiver. The single driver and single receiver share one differential pair, so the bus direction must be controlled by the host processor."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD75DGK","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD75DGK when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}