{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD35DG4","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD35DG4","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD35DG4","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD35DG4","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD35DG4, RS-422/RS-485 transceiver, full duplex, 5 Mbps data rate, 3 V to 3.6 V supply, 14-SOIC package, -40°C to 85°C operating temperature.","salesMarkdown":"Rated for 5 Mbps, this part supports update rates fast enough for most sensor arrays and drive parameter uploads without pushing the cable into transmission-line territory. At that speed, stub lengths on the bus need to stay short — keep the drop from the main trunk under a few inches or the reflections will eat into the 50 mV hysteresis margin. No AEC-Q100 rating here, so it is not aimed at under-hood automotive — keep it on the factory-floor side of the isolation barrier. The narrow SOIC saves board area compared to the wider 7.5 mm SOIC variants, but the pin pitch is the same 1.27 mm, so rework is straightforward with a fine-tip iron or hot air.","metaTitle":"SN65HVD35DG4 RS-485/RS-422 Transceiver, 5 Mbps, Full Duplex","metaDescription":"TI SN65HVD35DG4 full-duplex RS-485/RS-422 transceiver, 5 Mbps data rate, 3 V to 3.6 V supply, 14-SOIC. Active production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Full","Series":"-","Package":"Tube","Protocol":"RS422, RS485","Data Rate":"5Mbps","Mounting Type":"Surface Mount","Package / Case":"14-SOIC (0.154\\\", 3.90mm Width)","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Base Product Number":"65HVD35","Receiver Hysteresis":"50 mV","Operating Temperature":"-40°C~85°C","Supplier Device Package":"14-SOIC","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$58.8000","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/b478029e1adc17f2a0ac5127fa8c6674.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD35DG4/alternatives.json"},"ai":{"faq":[{"question":"What is the data rate of SN65HVD35DG4?","answer":"The data rate is 5 Mbps. At this speed, keep stub lengths on the bus short to avoid reflections that could exceed the 50 mV hysteresis margin."},{"question":"Is SN65HVD35DG4 compatible with RS485?","answer":"Yes, SN65HVD35DG4 supports both RS-485 and RS-422 protocols in full-duplex mode."},{"question":"What is the alternative to SN65HVD35DG4?","answer":"Within the same 65HVD35 base family, pin-compatible variants exist with different data rates or temperature grades. For a direct drop-in with the same 5 Mbps and industrial temperature range, the SN65HVD35D is the standard alternative — verify the package suffix matches your footprint."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD35DG4","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD35DG4 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}