{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD30MDREP","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD30MDREP","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD30MDREP","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD30MDREP","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD30MDREP, RS-422/RS-485 transceiver, full duplex, 25 Mbps data rate, 3V–3.6V supply, 50 mV receiver hysteresis, -55°C to 125°C operating temperature, 8-SOIC package.","salesMarkdown":"## RS-422/485 transceiver with military temperature coverage The full-duplex capability allows simultaneous transmit and receive on a four-wire bus, which is the typical topology for point-to-point RS-422 links and for RS-485 multi-drop systems that need separate data paths. At 25 Mbps the SN65HVD30MDREP supports the upper end of RS-485 signaling speed. Practical cable length at this rate is typically under 100 metres; above that the signal-integrity budget tightens and termination becomes critical. For slower links (below 1 Mbps) the same transceiver works without any configuration change — the slew rate is not limited, so the tradeoff is faster edge rates that may need attention to stub lengths and termination matching. For a BOM line needing this exact military-temperature transceiver, the procurement path is a direct RFQ.","metaTitle":"TI SN65HVD30MDREP RS-422/485 Transceiver, 25 Mbps","metaDescription":"Texas Instruments SN65HVD30MDREP RS-422/485 full-duplex transceiver. 25 Mbps data rate, 50 mV hysteresis, 3V–3.6V supply, -55°C to 125°C range.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Full","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Protocol":"RS422, RS485","Data Rate":"25Mbps","Mounting Type":"Surface Mount","Package / Case":"8-SOIC (0.154\\\", 3.90mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"3V ~ 3.6V","Base Product Number":"65HVD30","Receiver Hysteresis":"50 mV","Operating Temperature":"-55°C~125°C","Supplier Device Package":"8-SOIC","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9.6900","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/e36bdac6097bd5f69e0dd863839644d6.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD30MDREP/alternatives.json"},"ai":{"faq":[{"question":"Does SN65HVD30MDREP support full duplex communication?","answer":"Yes, the SN65HVD30MDREP is a full-duplex transceiver. It can transmit and receive simultaneously over a four-wire RS-422 bus or a four-wire RS-485 configuration."},{"question":"What is the difference between SN65HVD30MDREP and SN65HVD30DR?","answer":"The SN65HVD30MDREP is the military-temperature-grade variant (-55°C to 125°C) of the same base transceiver design. The SN65HVD30DR is the standard commercial/industrial version with a narrower temperature range. The MDREP suffix denotes the extended temperature screening and the enhanced reliability qualification for defence and aerospace programs. Both parts are pin-compatible in the 8-SOIC footprint."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD30MDREP","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD30MDREP when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}