{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD3086EDGSR","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD3086EDGSR","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD3086EDGSR","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD3086EDGSR","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD3086EDGSR, RS-422/RS-485 transceiver, full duplex, 20 Mbps, 4.5V–5.5V supply, -40°C to +85°C, 10-VSSOP package.","salesMarkdown":"That data rate suits high-throughput industrial links — Profibus, Modbus RTU at extended baud rates, or backplane serial buses where the 5V supply is already on the rail. Full-duplex means separate driver and receiver enable lines; the bus can transmit and receive simultaneously, which halves the cable count compared to half-duplex schemes that need a direction-control GPIO. The 30 mV receiver hysteresis provides built-in noise margin on long cable runs where common-mode shifts and reflections degrade signal quality. At 20 Mbps the transition time is tight — keep stub lengths under 300 mm and terminate at both ends with 120 Ω to match the characteristic impedance. ## Supply rail and temperature grade — design-in constraints If your system is 3.3 V only, you need a level translator or a different transceiver — the SN65HVD3086EDGSR is not compatible with 3.3 V logic on the supply side. ## Package and footprint — 10-VSSOP The mounting is surface-mount only. The base product number is 65HVD3086, so a 10-pin VSSOP variant is the only package option in this suffix.","metaTitle":"SN65HVD3086EDGSR RS-485/422 Transceiver, 20 Mbps","metaDescription":"Texas Instruments SN65HVD3086EDGSR is a full-duplex RS-485/422 transceiver with 20 Mbps data rate, 30 mV hysteresis, and industrial -40°C to +85°C range.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Full","Series":"-","Package":"Tape & Reel (TR); Cut Tape (CT)","Protocol":"RS422, RS485","Data Rate":"20Mbps","Mounting Type":"Surface Mount","Package / Case":"10-TFSOP, 10-MSOP (0.118\\\", 3.00mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"4.5V ~ 5.5V","Base Product Number":"65HVD3086","Receiver Hysteresis":"30 mV","Operating Temperature":"-40°C~85°C","Supplier Device Package":"10-VSSOP","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.2200","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/5f9d806ad62826a1e5f6ed60ba7b362d.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD3086EDGSR/alternatives.json"},"ai":{"faq":[{"question":"Is SN65HVD3086EDGSR compatible with 3.3 V logic?","answer":"No. For 3.3 V systems, a different transceiver or level translation is required."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD3086EDGSR","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD3086EDGSR when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}