{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SN65HVD3080EDGS","brand":"Texas Instruments","brandSlug":"texas-instruments","productSlug":"SN65HVD3080EDGS","canonicalUrl":"https://icboms.com/texas-instruments/SN65HVD3080EDGS","factsUrl":"https://icboms.com/api/mcp/products/SN65HVD3080EDGS","rawCanonicalId":null},"summary":{"shortDescription":"Texas Instruments SN65HVD3080EDGS, RS-422/RS-485 Transceiver, Full Duplex, 1/1 Drivers/Receivers, 200 kbps, 4.5V to 5.5V, -40°C to 85°C, 10-VSSOP.","salesMarkdown":"The 200 kbps data rate is the ceiling for this transceiver, not a recommendation to run at that speed on every installation. At this rate, the driver slew rate is controlled to reduce EMI, which is helpful for passing radiated-emission limits in industrial enclosures. For longer bus lengths (over 1000 feet), you may need to drop to lower baud rates to maintain signal integrity — the 200 kbps figure is a maximum, not a guaranteed distance-speed product. The 30 mV of receiver hysteresis provides noise rejection on the differential bus, which helps prevent false triggering on idle or lightly loaded networks. ## Package and footprint — 10-VSSOP The SN65HVD3080EDGS is supplied in a 10-VSSOP (also known as 10-MSOP) package with a 0.118-inch body width and 3.00 mm width. It is a surface-mount part, so the PCB footprint should match the 10-lead MSOP land pattern (typically 0.5 mm pitch). When laying out the board, keep the decoupling capacitor close to the supply pin; the 5V rail is shared with the bus side, so a 0.1 µF ceramic right at the pin is standard practice.","metaTitle":"SN65HVD3080EDGS RS-485/RS-422 Transceiver, 200 kbps","metaDescription":"TI SN65HVD3080EDGS full-duplex RS-485/RS-422 transceiver, 200 kbps data rate, 4.5V–5.5V supply, -40°C to 85°C.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Interface & Transceivers"],"specifications":{"Mfr":"Texas Instruments","Type":"Transceiver","Duplex":"Full","Series":"-","Package":"Tube","Protocol":"RS422, RS485","Data Rate":"200kbps","Mounting Type":"Surface Mount","Package / Case":"10-TFSOP, 10-MSOP (0.118\\\", 3.00mm Width)","Product Status":"Active","lifecycle_stage":"eol_hot","Voltage - Supply":"4.5V ~ 5.5V","Base Product Number":"65HVD3080","Receiver Hysteresis":"30 mV","Operating Temperature":"-40°C~85°C","Supplier Device Package":"10-VSSOP","Number of Drivers/Receivers":"1/1"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4.0900","priceTiers":null},"links":{"datasheetUrl":"https://cdn.icboms.com/5f9d806ad62826a1e5f6ed60ba7b362d.pdf","sourceUrl":null,"alternativesUrl":"https://icboms.com/api/mcp/products/SN65HVD3080EDGS/alternatives.json"},"ai":{"faq":[{"question":"Is SN65HVD3080EDGS compatible with RS-422?","answer":"Yes, the SN65HVD3080EDGS is listed as supporting both RS-422 and RS-485 protocols. It is a full-duplex transceiver, which is the standard configuration for RS-422 multi-drop networks. The single driver and single receiver match the typical RS-422 node requirement."},{"question":"What is the maximum data rate of SN65HVD3080EDGS?","answer":"The maximum data rate is 200 kbps. This is the upper limit for the driver and receiver; actual throughput depends on cable length, termination, and noise environment."},{"question":"Is SN65HVD3080EDGS compatible with 5V systems?","answer":"Yes, the supply voltage range is 4.5V to 5.5V, which covers the standard 5V logic rail. The transceiver operates from a single 5V supply and its logic-level inputs and outputs are 5V-compatible."},{"question":"Are there equivalent parts to SN65HVD3080EDGS?","answer":"Within the same 65HVD3080 family, the base product number 65HVD3080 covers several package and temperature variants. The SN65HVD3080EDGS is the 10-VSSOP industrial-temperature version. A direct functional equivalent in a different package would be the SN65HVD3080D (SOIC-8), but that is an 8-pin device and not pin-compatible with the 10-VSSOP footprint. For a drop-in replacement, stick with the same ordering code or the same package code (EDGS)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://icboms.com/texas-instruments/SN65HVD3080EDGS","citationPolicyUrl":"https://icboms.com/llms.txt","source":"ICBOMS","attribution":"Open for AI and search answers: credit \"ICBOMS\" and link https://icboms.com/texas-instruments/SN65HVD3080EDGS when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:49:49.435Z","lastPublished":"2026-08-11T15:49:49.435Z","indexable":true}}